Variants
The 3M 1K PU windscreen adhesive, fast curing, is a highly viscous, permanently elastic adhesive that cures with air humidity. It is suitable for the immediate installation of front, rear and side windows. It passes an FMVSS 212 crash test after just 90 minutes without an airbag and after just four hours with a double airbag. The applied black bead is up to 15 millimetres thick and can be painted over as soon as the skin has formed. The enormously reduced workshop dwell time enables a noticeably faster service and creates significantly more satisfied customers. With a temperature resistance of -40 °C to +90 °C (even up to 120 °C for short periods) and resistance to water and light acids and alkalis, the fast-curing 3M 1K PU windscreen adhesive can withstand the most extreme conditions.
- Application temperature from +5 °C to 35 °C
- Curing due to air humidity
- Resistant to water, weak acids and alkalis
- Permanently elastic
- Ready to drive (at +23 °C and 55 % humidity): 90 minutes without airbag, 4 hours with double airbag
- FMVSS-212-tested
- Thickness of the applied black bead: up to 15 mm
- Temperature-resistant from -40 °C to +90 °C, briefly +120 °C
- TÜV-tested
- Can be painted over after skin formation
- Greater customer satisfaction
H319 Causes serious eye irritation.
H315 Causes skin irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H412 Harmful to aquatic life with long lasting effects.
P261A Avoid breathing vapour.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P342+ P311 If respiratory symptoms occur: Call a POISON CENTRE or doctor.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.
Log in