Product information "3M 461X Lapping Film, 5 micron, roll 101.6 mm x 45.7 m"
For the highest demands on the surface quality of metal and plastic workpieces. All lapping films should be used "wet". Water, emulsion or other commercially available coolants can be used as grinding aids.
Properties
Homogeneous, non-compressible film base with high precision
Micron grain size
Water and oil resistant
Fully synthetic resin bond
Advantages
Tight tolerances in the grain sizes
More uniform finish
Reduced clogging
Reproducible, precise and determinable surface quality
Very good grain adhesion
Product benefits
High productivity
Long tool life
Reproducible surface quality
Field of application
For the highest surface quality requirements on metal and plastic workpieces
All lapping films should be used wet
Water, emulsion or other commercially available coolants can be used as grinding aids
Share your experience with the product with other customers.
Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.
Log in
No reviews found. Go ahead and share your findings with others.
Article no:
83086
Part number:
87097
SAP number:
7100041794
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
3M 266X is self-adhesive (PSA) on a 3 mil film backing with aluminium oxide grain and is available in grain sizes 0.3 - 3 - 9 - 12 - 30 - 40 microns. It is a 3M Lapping Film type P, i.e. it has a harder bonding system and is used for hard materials.
The Grinding & Cleaning Kit is your complete solution for grinding and cleaning processes that allow you to achieve more. It contains the most powerful products and demonstrates the most efficient process. The kit includes the Scotch-Brite Clean and Strip XT Pro S-grinding disc and the 3M Cubitron II Fiber Disc 982CX PRO 36+. With these discs, you can increase productivity, achieve consistent quality and improve user safety. When developing the 3M Cubitron II Fibre Disc 982CX Pro, 3M engineers reformulated the breakthrough technology behind 3M Cubitron II abrasives. This revised 3M precision-moulded grain offers even faster stock removal and even longer life to make your work even more productive. The advantage of a complete system 3M Cubitron II fibre disc 982CX Pro is part of a complete sanding system for the angle grinder. When you combine 3M Cubitron II discs with our pneumatic angle grinder and high-performance backing pads, you are ready for a new level of productivity with less vibration, noise and dust. When these components are used together, they reinforce each other's effectiveness and offer optimum abrasive performance - also in terms of abrasive life, stock removal and consistency. Setting standards across industries When developing the 3M Cubitron II fibre disc 982CX Pro, we had your industry in mind. In metalworking, the 982CX Pro does a great job on metals from mild steel to sheet metal. With a wide range of applications in shipbuilding, boatbuilding and metalworking, it masters the challenges specific to your industry. In mechanical engineering, these fibre discs are unbeatable for hard work in agriculture and construction, for industrial machinery, in food processing or for oil and gas plants. Robot technology with maximum efficiency Automated grinding processes are only as efficient as the abrasives used for them. Leading robotic system integrators around the world rely on 3M Cubitron II fibre discs for their legendary performance and ability to reduce downtime. The 3M Cubitron II 982CX Pro fibre disc's redesigned shaped ceramic grain allows robots to finish welds and maximise efficiency long after other fibre discs have had to be replaced. The Scotch-Brite XT Pro contains a silicon carbide abrasive grain integrated into an open nylon fibre. It effectively removes rust, paint, coatings and adhesives from surfaces without significantly altering the base material. The high-strength fibres are very adaptable, resistant to abrasion and stress and work well on the edges of a workpiece.
The TYROLIT NATURAL FIBRE DISC is a new, unique abrasive disc that combines aggressiveness with high working comfort thanks to a ceramic grain. Maximum service life and an environmentally friendly jute fibre backing deliver top performance. An additional backing pad is not required as it is already integrated into the product. This natural fibre backing can be trimmed and is therefore superior to other discs in terms of service life. This saves the user time and enormous costs.
This pendulum surface grinding wheel ensures universal use on high-alloy steels and HSS. This is achieved through the use of special aluminium oxides and mixtures with sintered aluminium oxides combined with special bond systems. The highest cutting performance can be achieved with sintered aluminium oxide compounds such as 454A. The next higher quality level is the resin-bonded VIB-STAR CBN wheel from TYROLIT.
99015LVC is a double-sided adhesive tape with a non-woven paper backing and low VOC and FOG values that has been specially developed for use in vehicle interiors. It can be used to bond common foam materials such as PU ester foams and EPDM as well as other high and low energy substrates. The non-woven paper backing offers dimensional stability during lamination, easy handling during processing and excellent die-cutting properties. The tape is stronger than conventional transfer tapes, has a short-term temperature resistance of up to 200 °C and is suitable for most demanding applications. The tape has been specially developed to meet the requirements of vehicle manufacturers and suppliers with regard to the JAMA and VDA-278 standard.
Contents:
50 meter
(€0.23* / 1 meter)
Variants from €11.92*
€11.57*
Data protection notice
The video will be loaded after your confirmation via the video portal YouTube. By confirming, you agree to load the videos on this page from the external provider YouTube in compliance with the GDPR.