3M 5363F Acrylic adhesive tape, dark gray, 25 mm x 66 m, 0.4 mm

For the highest demands on surface quality, combined with high cutting performance and an exceptional finish.

When sharpening solid carbide or carbide-tipped tools, only discs with silicon carbide specifications should be used. Due to their special grain shape, you will achieve good results even on very hard workpieces. This disc can also be used for cast iron. A reduction ring set is already included in the packaging and can also be reordered.

Cubitron II is a further development of the previous Cubitron abrasive. Its secret lies in the unusual shape and arrangement of the abrasive grains: the individual ceramic grains are precisely moulded, uniform in size, arranged vertically and have the shape of small triangles. They are applied evenly, but randomly distributed, so that the typical grinding pattern of a fibre disc can be found. The triangular discs of CUBITRON II form a very sharp grinding surface with unprecedented stock removal rates and service life. The significantly higher efficiency in the machining process ensures cost savings and more pleasant, ergonomic working. In addition, a new dimension in surface quality is achieved.

The best possible finish on various paints and clear coats with the 3M Perfect-It polishing pads with polishing skin for random orbital polishing machines. Designed for use with the 3M Perfect-It random orbital sander polishing system so you can achieve the desired finish without streaks, swirl marks or holograms.   The 3M Perfect-It Polishing Pads with Polishing Skin for Random Orbital Polishing Machines are designed for paint finishing and polishing for professionals, regardless of experience, who want to achieve a high quality finish. The 3M Perfect-It Coarse Polishing Pads for random orbital polishing machines quickly remove sanding marks with a grit size of 3000 or finer without additional swirl marks. This makes the polishing step easier. The 3M Perfect-It Medium polishing pad for random orbital polishers removes light to medium defects that do not require aggressive removal. Together with the 3M Perfect-It random orbital polisher and the 3M Perfect-It random orbital polishing compound, these pads produce a lower spin speed than rotary tools without the risk of sanding through. The 3M Perfect-It polishing pads with polishing skin for random orbital polishing machines are available in diameters of 130 mm and 150 mm and coarse and medium grit sizes. These single-sided pads are equipped with a 3M Hookit attachment for quick change. They are part of the easy-to-use 3M Perfect-It random orbital sander paint finishing system, which includes pads, fluids and tools. The system is designed to achieve a high quality surface finish. The existing standard operating procedure process guide provides step-by-step instructions for paint finishing in car repairs.

The FPCs pre-assembled with 3M 9077 can be inserted into the lead-free soldering process (peak temperature 260°C, 20 sec.). The protective cover remains largely undamaged and can be easily removed. The acrylate adhesive film 9077 has good peel strength even at high temperatures. Due to the carrier material, this adhesive tape also has excellent punchability. The low outgassing of the adhesive minimises contamination of electronic components.

tesa 4338 is characterised by a strong green colour, which is used particularly in industries such as shipping, commercial vehicles, aviation and the painting of rail vehicles. What is important here is the high flexibility of the backing material, a precise painted edge and a colour that stands out clearly from the substrate. The ageing-resistant natural rubber adhesive has very good initial adhesion, can remain on the painted object for up to a week outdoors, is temperature-resistant up to 120°C and can be removed without leaving any residue after the painting and curing process.