3M 787C Fiber sanding discs 125mm P120 #779907

The 3M fibre disc 787C is ideal for the daily use of fibre discs without compromising on performance and economy. Achieve excellent service life and removal results for stainless steel up to grit size 120+, especially at low and medium pressure. The special design of this fibre disc ensures low temperature development with the known poorly heat-conducting stainless steels.

When developing the 3M Cubitron II fibre disc 982CX Pro, 3M engineers reformulated the groundbreaking technology behind the 3M  Cubitron II abrasives. This revised 3M precision-moulded grain offers even faster stock removal and even longer life to make your work even more productive. The advantage of a complete system 3M Cubitron  II fibre disc 982CX Pro is part of a complete sanding system for the angle grinder. When you combine 3M Cubitron II discs with our pneumatic angle grinder and high-performance backing pads, you are ready for a new level of productivity with less vibration, noise and dust. When these components are used together, they reinforce each other's effectiveness and offer optimum abrasive performance - also in terms of abrasive life, stock removal and consistency. Setting standards across industries When developing the 3M Cubitron II fibre disc 982CX Pro, we had your industry in mind. In metalworking, the 982CX Pro does a great job on metals from mild steel to sheet metal. With a wide range of applications in shipbuilding, boatbuilding and metalworking, it masters the challenges specific to your industry. In mechanical engineering, these fibre discs are unbeatable for hard work in agriculture and construction, for industrial machinery, in food processing or for oil and gas plants. Robot technology with maximum efficiency Automated grinding processes are only as efficient as the abrasives used for them. Leading robotic system integrators around the world rely on 3M Cubitron II fibre discs for their legendary performance and ability to reduce downtime. The redesigned shaped ceramic grain of the 3M Cubitron II 982CX Pro fibre disc allows robots to finish welds and maximise efficiency long after other fibre discs have had to be replaced.

Newly developed for your requirements. Introducing the next step in surface finishing technologies: Scotch-Brite precision non-woven discs. This new addition to the Scotch-Brite range promises the consistency you've come to expect, with faster stock removal and longer abrasive life. By combining two outstanding 3M technologies - fleece and the 3M precision-moulded ceramic grain - you can now achieve an ideal finish even faster. To help you work even more efficiently, these discs are available in brighter, more vibrant colours to make them easier to distinguish. In addition, the range of grits has been extended to include fine and extra coarse versions, giving you an even wider choice of solutions for your abrasive needs.   Improve your work processes. These high quality general purpose abrasive discs have been developed to optimise the steps involved in surface finishing, including cleaning, blending, deburring and finishing. Typical substrates include aluminium and soft metals, carbon steel and stainless steel. Applications range from the removal of coatings and corrosion to the finishing and post-processing of castings.

The 3M 987C fibre disc uses a binder additive that reduces the grinding temperature (grinding aid). The resulting cooler grinding sets new standards, particularly with poorly thermally conductive stainless steels, nickel alloys and titanium. The tarnishing behaviour of the grinding surface is greatly delayed during the work process. The resulting increase in the service life of the grinding wheel and the significantly reduced machining time also increase the cost potential.

The 3M fibre disc 787C is ideal for the daily use of fibre discs without compromising on performance and economy. Achieve excellent service life and removal results for stainless steel up to grit size 120+, especially at low and medium pressure. The special design of this fibre disc ensures low temperature development with the known poorly heat-conducting stainless steels.

Based on ceramic precision grit technology, the 3M Cubitron II Hookit 947A cloth discs generate outstanding performance characteristics. Cool grinding, supported by a grinding aid, a strong cloth backing and a hooking backing (Hookit) make the product in the grit range from 40+ to 120+ a guarantee for the best work results, especially on metal. The product is available in 115 mm and 125 mm sizes and can also be used at higher speeds on angle grinders.

Scotch-Brite SL-DR Roloc non-woven discs are much more aggressive and are therefore ideal for rough surface cleaning and for removing thin weld seams and spots.

This file is used in particular for processing tools in the wood and machine industry. The different grit sizes allow you to customise your tool to suit your application. Silicon carbide files are mainly used for carbide or carbide-tipped tools and have a grey-green colour. Orange coloured files are mainly used for all types of steel and stainless steel.

The double-sided adhesive tape 3M 9527 with paper fleece backing is characterised by its very high instant adhesion and good adhesion to low-energy materials (e.g. PP, PE). It is 0.13 mm thick and temperature resistant up to +50°C (+70°C for short periods).

TYROLIT technology enables the use of 2 outer cloths and is well suited for cutting solid material and large cross-sections. Thanks to its high cutting ability, this STANDARD cut-off wheel enables power-reduced work and the best results. Developed for use on hand-held cut-off machines with electric or petrol motors. Suitable for pure freehand and guided freehand applications.

3M VHB high-performance adhesive tapes are double-sided adhesive tapes made of closed-cell acrylate adhesive. They offer good adaptability to the surfaces to be bonded. Smooth or structured surfaces can be bonded over the entire surface without tension. Ideally suited for a variety of materials with high surface energy, such as metals, plastics or glass. The products are characterised by their high transparency.

The STANDARD 2in1 flap disc has two advantages. Firstly, it offers the user a very long service life, and secondly, it guarantees very good specific stock removal. The TYROLIT 2in1 flap disc is used on high-alloy steels and stainless steel as well as on unalloyed and low-alloy steels.