3M Accuspray 1,4mm nozzle heads orange #16612 (Pack=4pcs)

With the 3M Accuspray nozzle heads from the 3M Accuspray system, you can optimise the filler application process in every respect. In just three simple steps, you can replace a nozzle head on the corresponding 3M Accuspray gun and have a completely clean device in your hand in just 30 seconds. Together with the 3M PPS cup system, a material change is possible within a very short time and time-consuming cleaning of the filler gun is a thing of the past. So every application feels like using a brand new spray gun. Thanks to the optimised spray jet of the nozzle heads and the gun's modern HVLP technology, you achieve a smooth filler surface, an ideal layer thickness and significantly less spray mist during application. Your immediate benefit from this is a considerable reduction in the amount of work required, as the sanding time required in the subsequent process is minimised. You also reduce material consumption and your health risks. The 3M Accuspray nozzle heads are available in three different diameters: 1.4 millimetres (orange), 1.8 millimetres (white) and 2.0 millimetres (red). In combination with the 3M Accuspray HGP pressure cup gun, all nozzles are also suitable for highly viscous materials.

With the 3M Accuspray nozzle heads from the 3M Accuspray system, you can optimise the filler application process in every respect. In just three simple steps, you can replace a nozzle head on the corresponding 3M Accuspray gun and have a completely clean device in your hand in just 30 seconds. Together with the 3M PPS cup system, a material change is possible within a very short time and time-consuming cleaning of the filler gun is a thing of the past. So every application feels like using a brand new spray gun. Thanks to the optimised spray jet of the nozzle heads and the modern HVLP technology of the gun, you achieve a smooth filler surface, an ideal layer thickness and significantly less spray mist during application. Your immediate benefit is a considerable reduction in the amount of work required, as the sanding time required in the subsequent process is minimised. You also reduce material consumption and your health risks. The 3M Accuspray nozzle heads are available in three different diameters: 1.4 millimetres (orange), 1.8 millimetres (white) and 2.0 millimetres (red). In combination with the 3M Accuspray HGP pressure cup gun, all nozzles are also suitable for highly viscous materials.

The cutter knife consists of a metal housing. The knife handle is ergonomically shaped and sits securely in the hand thanks to its non-slip surface.

For clean application of all paint materials such as basecoat, 2K topcoat, clearcoat, filler and spray filler.

The 3M Accuspray gun HG14, together with the 3M Accuspray nozzle heads and the 3M PPS cup system, optimises the filler application process in every paint shop. The nozzle heads can be replaced after each application in just three simple steps. You save yourself the hassle of cleaning the filler gun and have a virtually new device for every application. The 3M Accuspray system works with the proven HVLP technology (High Volume Low Pressure). This ensures a smooth surface and ideal layer thickness of the filler. Time-consuming sanding is thus reduced to a minimum. In addition, hardly any spray mist is produced, which noticeably reduces material consumption and is also good for your health. The 3M Accuspray gun weighs just 324 grams and has excellent ergonomics. This means that it is easy to apply filler even in hard-to-reach places and from any angle. This increases your productivity and saves material, time and costs.

Protectprotect your pistols from damage with the 3M PPS pistol holder. The guns can be safely stored in our holder. The gun holders can be attached to the wall, so that the working environment is tidier and the guns are always within reach.

For the highest demands on surface quality, combined with high cutting performance and an exceptional finish.

3M PROTECTA retaining rope

Made of robust, durable and high-strength material. These sanding blocks have an embossed rubber coating that allows Stikit sandpaper rolls and Stikit sheets to adhere.

3M Epoxy Film Super 10 is a polyester film reinforced with an epoxy film that fulfils the highest demands in terms of both its electrical and mechanical properties. The insulating tape can withstand a breakdown voltage of up to 8,000 volts and, with a temperature resistance of 155 °C, belongs to insulating material class F. At the same time, mechanical damage is virtually impossible thanks to its flame resistance, high puncture resistance and resistance to oils and solder dripping. The epoxy film is extremely robust and elastic. It is therefore particularly suitable for use as a coil cover, for cable fastening and cable bundling, for cover bandages and for end and crossover insulation in transformers. The highly elastic epoxy tape is also characterised by its easy handling. It can be unrolled very evenly and its heat-curing rubber adhesive prevents subsequent flagging. The easy handling contributes significantly to increased productivity by saving time and material.

3M 314 D is a universal abrasive cloth for metal and wood sanding, available in rolls and sheets. It has a highly flexible cloth backing that can be torn in all directions. Suitable for applications on shaped or profiled workpieces. Can be used both by hand and on machines.

The 3M Aura 9332+ folding mask allows you to breathe almost effortlessly and is extremely comfortable to wear. It owes its comfort plus in particular to the three-part design with the newly developed filter fleece. The advantages of the particle mask start with good visibility: the sealing points on the top of the mask reduce the fogging of glasses - especially in combination with its 3M Cool Flow exhalation valve. This  valve increases wearing comfort, especially in hot and humid environments, as it allows respiratory heat and moisture to escape easily. The new filter technology also ensures comfortable breathing. It combines the advantages of 3M Electret filter technology with those of the new advanced technology for barely perceptible breathing resistance with reliable filter performance. The average inhalation resistance of 63% is significantly lower than the maximum permissible value of EN 149:2001+A1:2009. Two further advantages of the mask lie in its three-part design: on the one hand, it leads to greater comfort and problem-free speaking, and on the other hand, the mask can be folded flat and is therefore practical to take with you. The special design of the nose area is also ideal, as it adapts perfectly to the shape of the wearer's face. The chin strap makes it easy to position the mask, ensuring a good fit and a secure seal. The 3M Aura respirator 9332+ is hygienically individually packaged and has protection level FFP3 NR D. The application limit is 30 times the limit value for particles. They are used in the construction industry, in agriculture, in quarries, in the clay and ceramics industry, in iron and steel foundries, in the chemical industry, in metalworking and processing, in the pharmaceutical industry and in construction. Approval according to standard EN 149:2001+A1:2009.