Variants
Use 3M Cushion-Mount Plus plate mounting tape E1820H to mount your photopolymer plates on printing cylinders. Our 0.51 mm thick, blue double-sided plate mounting tape with high adhesion on the plate side has micro-channels that prevent the formation of air bubbles. It is used for clichés with mainly solid areas in a combination of solid and halftone motifs.
- Thickness 0.51 mm
- Solid
- Minimal thickness tolerances allow the printer to use multiple foam densities in one print job to optimise print quality
- The protective film creates micro-channels on both sides of the adhesive tape. The diamond-shaped grid pattern allows the air trapped between the adhesive tape and cylinder/sleeve and between the adhesive tape and cliché to escape. This increases productivity, reduces waste and minimises
- Printing plates mounted on E1820H have no air bubbles under the cliché - thanks to the micro-channels integrated into the adhesive tape
- The protective film creates diamond-shaped microchannels in the adhesive
- Removal of the cliché from the foamed adhesive tape is completely residue-free
- Foamed plate mounting tape for flexographic printing
- Blue mounting tape for flexo plates with high adhesion on the plate side and microchannels that prevent the formation of air bubbles
- The plate mounting tape can be removed cleanly from the sleeve or steel printing cylinder
Log in