3M Cubitron 3 cut-off wheel, 75 mm, 1 mm, 6.35 mm, 60 , type 41 #90230

The 3M maintenance-free half mask 4251+ offers you effective respiratory protection as a user-friendly complete mask. The new, improved exhalation valve reduces breathing resistance during exhalation, reduces heat and moisture build-up and thus makes breathing easier, especially in hot and humid working environments. Our 4000+ series half masks have a soft, skin-friendly, silicone-free face seal. The FFA1P2 R D filter class protects against many of the common organic gases, vapours and particles in industrial environments. The lightweight, well-balanced design with integrated, maintenance-free filter elements ensures good peripheral vision. The integrated filter elements are maintenance-free. You can use the half mask until it is time to change it according to the filter change schedule or until the filter elements are saturated. Then dispose of them properly. The comfortable harness with adjustable head strap offers a secure fit and adapts to different head shapes and sizes. The flat design does not restrict your field of vision and the two large-area activated carbon filters ensure low breathing resistance. The FFA1P2 R D filter class protects against organic gases and vapours up to 30 times the limit value (boiling point above 65 degrees Celsius) and particles up to 10 times the limit value. A resealable bag for hygienic storage and transport is included in the scope of delivery. *The exhalation resistance of the 3M™ 4000+ half mask series has been reduced by >30% at 120 l/min and >35% at 160 l/min compared to the previous 3M™ 4000 series. The results were measured by 3M in 2017 under laboratory conditions. The breathing rates are only an example.

tesafix 4957 is a double-sided adhesive tape consisting of a PE foam carrier and an acrylate adhesive. tesafix 4957 is available in white or black and is covered with a brown release paper (PV0). The soft, highly pliable foam ensures immediate adhesion, even with low pressure. tesafix 4957 is also suitable for rougher adhesive surfaces and compensates for differences in expansion between different materials.

The dust-repellent coating makes it particularly suitable for filler and lacquer sanding or intermediate lacquer sanding of nitro lacquers, DD and SH lacquers.

The TYROLIT FAST CHANGE enables very fast disc changes thanks to the Velcro fastener. The stable paper backing enables high-speed sanding on many surfaces. This product gives you a particularly even finish on lacquers, paints and composite materials. In addition, a special stearate layer reduces clogging and clogging of the disc, thereby increasing its service life.

Get a fast and even cut for numerous applications with the 3M Silver cutting disc. It cuts quickly through metal tubes, sleeves, flat sheets and other workpieces. The disc contains our precision grain, which has continuously sharp cutting edges, so it cuts through the material rather than scraping or ploughing through it like conventional abrasive grains. This results in a significantly longer service life than conventional abrasives with ceramic grit and a consistently stable high cutting rate over the service life. The disc must be used with an angle grinder or cut-off machine (available separately) and should always be used with a protective cover for safety reasons. The maximum speed of the disc must be greater than or equal to the maximum speed of the angle grinder.

Scotch-Brite Roloc Cut and Polish abrasive discs for fast stock removal and an even finish when deburring, cleaning and polishing. Our discs provide sharp stock removal and are highly conformable. They are ideal for irregular surfaces and produce an accurate sanding pattern and a consistent, even finish.