3M Cubitron II Fibre disc, 115 mm, 80+, 22 mm hole, 25 pieces / pack

Variants

Körnung

Reset selection

€25.35* % €0.00* (0.00% saved)

Unit price: €25.35* % €0.00*

Unit price (net): €21.30 % €0.00

Delivery time 2-5 days working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Cubitron II Fibre disc, 115 mm, 80+, 22 mm hole, 25 pieces / pack"

The 3M fibre disc is ideal for the daily use of fibre discs without compromising on performance and economy. Achieve excellent service life and removal results for stainless steel up to grit size 80+, especially at low and medium pressure. The special design of this fibre disc ensures low temperature development with the known poorly heat-conducting stainless steels.

Properties

slotted holder for all conventional angle grinders
precision-moulded CubitronII abrasive grains on a hard-wearing fibre backing material
cooler sanding and better surface finish
grinds faster and lasts longer
even chip removal

Advantages

maximum removal rate and service life

Questions about the article?

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 41779

Part number: 33410

SAP number: 7100035473

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

Recently viewed products

3M plate mounting tape E1120, light orange, 1372 mm x 22.85 m, 0.50 mm

High-quality foamed and extremely soft plate mounting tape for pure halftone motifs when the standard portfolio is no longer sufficient. All plate mounting tapes from 3M have been specially developed for the highest demands and are suitable for the finest screen rulings and new repro techniques such as NX, HD and MC and are already being used successfully worldwide.

Contents: 22.85 meter (€47.02* / 1 meter)

Variants from €357.84*

€1,074.31*

Tyrolit Pressed compact discs DxDxH 25x25x4.8 Universal insert, 2 A MEDIUM, shape: 1, Art. 34201993

The range of pressed compact discs extends from an aggressive and rigid deburring tool to a soft tool for a perfect surface finish. They are particularly suitable for hard-to-reach areas and do not change the surface geometry of the workpiece in any way when used. The main areas of application are deburring, cleaning, blending, finishing and the processing of weld seams. Compact discs offer increased safety compared to other deburring tools and a particularly cool finish.

€5.87*

Tyrolit Pressed compact discs DxDxH 76x6x6.3 Universal insert, 3 C FEIN, shape: 1, Art. 34189557

€7.81*

Tyrolit Fleece pins DxD 60x30 For steel, stainless steel and non-ferrous metals, P180, A FEIN, shape: 52LA, Art. 908780

TYROLIT fleece pins are highly adaptable and ensure that there is no change to the surface finish. The TYROLIT Premium range is now being extended by 29 types to provide you with a choice of different grit sizes and other dimensions. The large number of grit gradations means that different surface structures and roughnesses can be achieved. TYROLIT fleece points are also available with an inserted abrasive cloth to achieve higher material removal and a coarser surface finish.

€9.54*

3M Finesse-it polishing felt, red/white, 127 mm, hard #09358

Buffing Pad red/white is a polishing disc for polishing with the different compounds (harder and stiffer=red/white). The red side is used to hold the backing pad.

Variants from €1.17*

€3.03*

TYROLIT grinding wheel DxUxH 230x7x22.23 FOCUR Extra Vibstar for cast iron, shape: 27 - offset version, Art. 474534

The vibration damping developed and patented by TYROLIT enables the professional user to sand particularly gently. The multi-layer structure and the firmly connected plastic flange reduce the vibration load by up to 50 %. The PREMIUM Vibstar technology counteracts occupational illnesses such as muscular and skeletal injuries, neurological disorders and circulatory disorders such as white finger disease. ZA24N-BFX: especially for surface grinding, ZA24P-BFX: the universal type, ZZA24R-BFX: the deburring specialist and ZZA24S-BFX: for long tool life.

€13.04*