3M Cubitron II flap disc 967A, 125 mm, 22.23 mm, 60 , flat #65070

The 3M SecureFit safety helmet X5514NVE-CE provides you with safe and comfortable head protection. The safety helmet was designed for general industrial use and everyday safety requirements. Inspired by modern climbing helmets, it offers protection against small falling objects. It has adjustable positioning on the head. Our 4-point ratchet closure system allows the headband to be adjusted quickly and comfortably as required. The exclusive, patented 3M pressure distribution technology is integrated into the helmet. It not only ensures a secure fit, but also improves wearing comfort. This technology reduces the force on the head by up to 20% compared to conventional 3M helmet straps. The rimless design allows an unobstructed view upwards. This makes it easier to see and avoid potential hazards in the surrounding area. This neon green safety helmet is equipped with a patented 3M UVicator sensor, which changes colour from red to white when exposed to harmful UV radiation. Exposure to UV radiation can cause the helmet shell to become brittle, limiting effective protection. The colour change of the sensor indicates when the helmet should be replaced. The existing notches and holders for accessories are compatible with a wide range of 3M protective visors, earmuffs and other accessories. Chin straps with plastic fasteners can also be attached to the helmet. Tested for lateral deformation and liquid metal splashes and fulfils the EN 397 standard for industrial safety helmets.

Deburring of shaft and piston rods before hard chrome plating; deburring of turbine blades, stamped flat parts, thread guides and machine parts, gear wheels, die-cast and injection-moulded parts, automotive parts (e.g. piston rings, pistons), parting lines on cast and pressed parts; Attention: The direction of rotation must be observed!

The 3M precision-moulded ceramic grain contributes significantly to the performance of this disc. The grain tips of the triangular discs break during the sanding process, leaving sharp cutting edges at all times. The surface of the material is therefore continuously cleanly processed. The result is fast, cool sanding and an extended service life of the abrasive. This abrasive paper is a sanding tool for coarse and fine sanding of all types of wood, stainless steel sheets and leather. The semi-open coating prevents premature clogging of the sanding tool.

The single-sided EPDM adhesive tapes consist of a closed-cell EPDM foam. They are ideal for sealing against dust and moisture, e.g. in household appliances, computers and other electronic devices. Due to their excellent acoustic properties, these adhesive tapes are also suitable for damping and soft mounting of sensitive appliance parts.

3M Dual Lock is a self-adhesive, flexible pressure seal in roll form. The patented system consists of black polyolefin strips with hemispherical heads on a short stem. Pressing them together creates a firm but removable connection. In contrast to conventional fastening systems such as screws or rivets, no holes are required which would detract from the visual appearance of the surface. The synthetic rubber adhesive is characterised by high instant adhesion and is suitable for low-energy surfaces such as PP, PE and powder-coated materials.

With Post-it Super Sticky Dry Erase Film, you can transform any room into a place for teamwork. The film is easy to apply and no tools are needed - simply unroll, peel and stick. Thanks to its special Dry Erase coating, Post-it Super Sticky Dry Erase Film is dirt-repellent and can be cleaned without leaving any residue after each use. The Dry Erase Film adheres to a variety of painted drywall and painted steel surfaces, glass, painted wood and existing whiteboards or blackboards. Post-it Super Sticky Dry Erase Films can be cut to size and offer endless possibilities for flexible whiteboard solutions, from horizontal applications on desks or tables to vertical applications on surfaces where traditional whiteboards cannot be applied. The films are also ideal for replacing old whiteboard surfaces that have become stained - simply stick them onto the existing board and it will look like new again.