3M Diamond Grade DG³ Reflective film 4095, blue, 914 mm x 45.7 m

For demanding processing conditions The 3M polyester adhesive tape 8901 is a thin, pliable polyester adhesive tape that is ideal for masking tasks in high-temperature applications and adheres well to silicone-coated surfaces. The translucent blue backing film is tear-resistant. Coated with a silicone adhesive, the tape produces sharp coloured edges and is therefore very suitable for masking workpieces during powder coating, for example. It can be removed from most surfaces cleanly and in one go without fraying or tearing. This adhesive tape is also ideal for splicing silicone liners, paper and films that are exposed to high temperatures. Thanks to its good chemical resistance, this adhesive tape proves its worth in chemical processes and other demanding work procedures, such as anodising. The pressure-sensitive silicone adhesive is suitable for a wide temperature range between -50 °C and +204 °C. Recommended areas of application Masking of workpieces during powder coating Splicing of silicone liners, films and papers Bonding of composite materials Covering of metal surfaces in acid or etching baths As surface protection against scratches during handling and transport As an easily removable masking tape during powder coating, the 3M 8900 series polyester adhesive tape is a good choice.

The 3M Xtract pneumatic random orbital sander is a key component of the 3M Xtract sanding system. Together with 3M Xtract mesh discs and the portable 3M Xtract dust extraction unit, this powerful 0.28 HP (209 W) sander enables virtually dust-free sanding.   Robust construction for industrial use. 3M Xtract pneumatic random orbital sanders are equipped with powerful, precision-balanced air motors and durable, lightweight aluminium housings. These high-quality components withstand the long processing times in the workshop. Leave the dust behind. If you want a clean working environment and more efficient sanding, the 3M Xtract pneumatic random orbital sander is for you. Designed for dust extraction as part of the 3M Xtract sanding solution, these sanders connect easily to our 3M Xtract portable dust extraction unit, 3M machine sanding filter bags or your existing centralised dust extraction system. The rear threaded attachment allows for easy and safe attachment and removal of a 1" male threaded hose (sold separately) to effectively remove dust from the workpiece and surrounding area. In combination with 3M Xtract Net Discs and a dust extraction system, the system extracts up to 97 % of the dust generated during sanding. Experience the benefits of 3M Xtract random orbital sanding solutions. 3M is your system provider for all sanding needs. From mesh discs to random orbital sanders to portable dust collection units, we have everything you need to increase productivity and part quality in your shop. 3M's technical experts have decades of application and industry knowledge to ensure you get the right abrasive and the optimal system solution. Applications in focus Metal working and processing Sanding of filler Sanding of gelcoat Sanding of composite materials Woodworking Sanding stroke of 2.5 mm Chrome-plated lever Fine sanding When should you choose a sanding stroke of 2.5 mm? - For the use of fine grits - For the lowest material removal   Sanding stroke of 5 mm Silver lever General sanding work When should you choose a sanding stroke of 5 mm? - The most commonly used sanding stroke - Good ratio of material removal and finish   Sanding stroke of 8 mm Black lever Aggressive sanding When should you choose a sanding stroke of 8 mm? - When more material removal is required than with a sanding stroke of 5 mm - If the sanding should not be as aggressive as with a sanding stroke of 10 mm   Sanding stroke of 10 mm Golden lever Maximum aggressive sanding When should you choose a sanding stroke of 10 mm? - For maximum aggressive material removal - For sanding large surfaces or when a high removal rate is required

Double-sided PE foam adhesive tape consisting of a closed-cell polyethylene foam with acrylate adhesive. It is ideal for permanently fixing or mounting interior and exterior components such as holders, hooks, signs, mirrors, frames, mouldings, emblems, panelling, displays, decorative parts, etc.

This file is used in particular for processing tools in the wood and machine industry. The different grit sizes allow you to customise your tool to suit your application. Silicon carbide files are mainly used for carbide or carbide-tipped tools and have a grey-green colour. Orange coloured files are mainly used for all types of steel and stainless steel.

Cup wheels achieve maximum stock removal and service life for large-area grinding work. The cup wheel available for stone is particularly suitable for grinding scars on exposed concrete surfaces, chamfering and pre-grinding artificial stone and terrazzo tiles as well as surface grinding on marble, slate and granite. The user can choose between the 22.23 bore version and the M14 thread version for the tool holder. Note working speed: max. 50 m/s

This tool is used to grind all cutting tools for the wood and metal industry as well as various shear blades. These products are disc and cup wheels in the CBN grit size range B181 - B91. Compared to conventional corundum discs, CBN discs have significantly lower wear and higher dimensional accuracy.