3M ET 5 polyester film, transparent, 1219 mm x 66 m x 0.06 mm

The 3M Scotchflex cable ties black, UV-resistant are made of polyamide 6/6, a tear-resistant nylon. Thanks to the grid fastening principle, you can easily set any desired capacity. This makes the UL E97527-certified cable ties ideal for bundling multiple cables. Cable ties with grid closure for bundling multiple cables.

The adhesive film without carrier 3M 927 has a transparent adhesive film and good adhesion to low-energy materials (e.g. PE, PP). The 0.05 mm thick adhesive film is temperature-resistant up to +80°C (+120°C for short periods) and is characterised by its very high immediate adhesion.

The Powerbond Ultra Strong mounting tape is the strongest mounting tape from tesa and is suitable for securely fastening objects indoors and outdoors. tesa Powerbond Ultra Strong is the strongest mounting tape from tesa®. It is suitable for attaching objects indoors and outdoors. The impressive adhesive performance of up to 10 kg per 10 cm means that you can do without drills, plugs and screws even when fixing heavier objects. The mounting tape is easy to handle and provides a permanent and reliable hold. The extra strong mounting tape - securely fasten heavy objects without drilling For a long time, it was an unwritten law that heavy objects could only be securely fastened using screws or nails. With the introduction of tesa Powerbond® Ultra Strong at the latest, the law was broken. The strongest mounting tape from tesa positions itself as a real competitor to the drill with its high holding power. Thanks to the superior tesa® adhesive technology and an adhesive performance of up to 10 kg per 10 cm of tape, it is able to provide a permanently secure hold even for objects with a higher weight. With tesa Powerbond® Ultra Strong you can work quickly, cleanly and avoid damage such as drill holes in the substrate. Better bonding than drilling! GOOD TO KNOW ... OUR APPLICATION TIPS:   - APPLYING: In order for the mounting tape to develop its full holding power, the object and substrate must be free of dust, dirt and grease. A brush, a lint-free cloth and a silicone-free cleaner (or white spirit) are suitable for cleaning. - Check whether the surface or the object is rough. Apply the mounting tape to the rougher surface first. - Apply the tape in vertical strips over the full length of the object or surface. Reinforce the upper area with shorter strips, as this is where the greatest load is applied. Press the mounting tape down firmly for at least five seconds. - Remove the protective film from the double-sided adhesive tape and take care not to touch the open adhesive surface. This could impair the adhesive strength. - Fix the object and press firmly again for at least five seconds. -REMOVE: As the mounting tapes are intended for permanent use, material residue may remain on the object. Try to remove the residue with tesa® adhesive remover. To ensure that the substrate remains as undamaged as possible, carefully pull the mounting tape parallel to the wall

Thanks to their flexibility, the BASIC flap points adapt well to any workpiece contour. The radially arranged flaps of the flap points can be used on different materials and allow precise work in various applications such as matting, pre-polishing and cleaning surfaces. The highly flexible flaps also make it easy to work on hard-to-reach areas.

The coloured buffers adapt perfectly to the colour of your devices, surfaces and applications, e.g. as non-slip device feet or as spacers, e.g. on wood. Standard colours: black, white, grey, brown. Standard shapes: round, square, rectangular, hexagonal.

tesaprint 52310 (transparent), tesaprint 52315 (yellow), tesaprint 52320 (white) and tesaprint 52325 (pink) are different coloured plate mounting tapes, each with a different overall thickness.   - Easy and bubble-free plate mounting due to a structured film cover. Easy repositioning is possible during mounting, as the full adhesive strength only sets in during the machine run. - The high adhesive strength and good shear strength ensure a secure bond and prevent the clichés from moving during the printing process. - There is no adhesive residue on the cliché and printing cylinder when the plate is removed.