3M Hookit hook and loop adhesive disk 245, 150 mm, P80, unperforated #01647

The BASIC round brushes are very well suited for weld seam processing. Depending on the type of wire, TYROLIT provides you with the right brush for your application. You can use knotted brushes for surface preparation and for removing rust, scale and concrete residues.

3M PROTECTA evacuation sling

The Solus 1000 safety spectacles have a modern, sporty design and are available in two frame variants (blue/black and grey/black) and three lens tints (clear (2C-1.2), grey (5-3.1) and yellow (2C-1.2)). The SG AF coating included in all goggles exceeds the requirements of the K and N tests. Can optionally be worn with foam frame and/or rubber rim.

tesaprint 52332 was designed as a problem solver for cliché bonding and is used wherever particularly high adhesive forces are required. This is particularly the case for the permanent bonding of heavy clichés to stretch films.

3M HVLP high-performance nozzle heads for gravity feed cups offer first-class spraying performance for coatings such as lacquers, clear coats and top coats. Replaceable nozzles have been specially developed for gravity feed applications. These are used with the 3M high performance spray gun system and the 3M PPS 2.0 paint processing system and provide spray performance comparable to a brand new unit every time the nozzle is changed.   What makes the 3M high-performance spray gun system so unique is the technology of the interchangeable quick-change nozzles. Since paints and coatings only pass through the nozzle head and not the entire body of the spray gun, you get the performance of a brand new spray gun every time you replace the nozzle. You get the spray pattern, atomisation and application efficiency of a premium paint spray gun, ensuring more consistent spray performance every day with every application. The 3M HVLP high performance nozzle heads for flow cups are available in 0.9, 1.2, 1.3, 1.4, 1.6, 1.8 and 2.0 sizes for a wide range of industrial and automotive coatings. These include high-viscosity coatings, sprayable levelling compounds, thick-film fillers, primers, sealants, 1K top coats, solvent-based and water-based paints and clear coats. The interchangeable nozzles are designed exclusively for the 3M PPS 2.0 paint processing system, which reduces material waste, dirt and contamination compared to conventional metal paint cup systems. Soaking the spray gun in solvent is now a thing of the past. Our integrated complete system enables you to clean more intelligently. The nozzle heads are attached to the needle of the 3M™ high-performance spray gun and securely mounted with a specially designed locking ring. No additional tools are required for replacement. Simply remove the nozzle from the spray gun and either clean the fluid tip or replace the nozzle to get your spray gun working like new again.

3M 5451 and 5453 are PTFE-coated glass fibre adhesive tapes with a resilient silicone adhesive. These adhesive tapes have very good sliding properties, a very good non-stick effect and a high thermal and mechanical load capacity. Adhesive tape for coating plastic film welding equipment and as a sliding coating with high mechanical strength and an adhesive-repellent surface.