3M Lub-P cable lubricant, 0.95 l

TYROLIT PREMIUM milling cutters are manufactured on modern CNC grinding machines. The result is a high-performance precision tool that has been specially developed for use on non-ferrous metals. With these products you achieve the best tool life and maximum durability. By choosing the right machine, the right speed and working speed as well as the right milling cutter and tooth shape, you create the basis for PREMIUM results.

The 3M cable lubricant Lub-P is especially suitable for use in the energy supply and industrial sectors. Due to its special consistency, it forms a secure lubricating film on the cable sheath, even on heavy cables. It can be applied either by hand or by injection or pumping. Lub-P facilitates the pulling through and laying of cables and wires by reducing friction. Signs of wear are significantly reduced - both on the cables and on the equipment used. This effectively prevents cable sheath damage and also prevents cables from becoming tangled or getting stuck. It is therefore particularly recommended for long and winding cable runs. The transparent, water-based cable lubricant can be wiped off easily and cleanly if necessary. Neither silicone nor grease residues make it difficult to work on the cables. In addition, it does not cause irreversible stains on clothing, equipment or surroundings. Lub-P dries out very slowly and is therefore very economical. It leaves only a minimal residue as it contains less than 5.5 per cent solid components. This means that the cables do not stick together or to other cables, which facilitates their movement. It is suitable for high-performance cables and regular 600 V cables, as well as for most cable materials, including polyethylene and semi-cons. It is also compatible with semi-conductive materials. This means that, unlike wax or hydrocarbon based lubricants, it does not affect the volume resistance of medium and high voltage cable sheaths or the insulation layer. Lub-P is extremely temperature-stable and non-flammable. It therefore maintains the flame-retardant and self-extinguishing properties of the cable.

Thanks to their flexibility, tube brushes adapt to the surface of the workpiece. Internal cleaning in particular, for example of drill holes and other hard-to-reach areas, is no longer a problem. You can use the cylindrical tube brush to process all types of non-ferrous metals. They consist of a galvanised twisted wire and a simple fill spiral and are therefore easy to use.

The 3M precision-moulded ceramic grain contributes significantly to the performance of this disc. The grain tips of the triangular discs break during the sanding process, leaving sharp cutting edges at all times. The surface of the material is therefore continuously cleanly processed. The result is fast, cool sanding and an extended service life of the abrasive. This abrasive paper is a sanding tool for coarse and fine sanding of all types of wood, stainless steel sheets and leather. The semi-open coating prevents premature clogging of the sanding tool.

The sanding machines are characterised by low-vibration operation, wide air ducts and, thanks to their robust design, a long machine service life. Other special features: Power thanks to powerful motors, minimal vibration, high extraction capacity, robust design, 12,000 rpm, 0.28 hp (209 watts), operating pressure: 6 bar, air consumption 481 litres per minute. Included in the scope of delivery: Random orbital sander, backing pad (multihole), accessories for changing tools, oil, connection nipple for compressed air supply, operating instructions, 3M service pack

Technical surface conditioning fleece ideally suited for removing oxide layers, deburring and fine sanding. The newly developed 1FOR2 SC non-woven fabric (green) enables the removal of weld seams and spots while simultaneously fine sanding and levelling clean and smooth sanding transitions.