3M Microfinishing Film Roll 272L, 20 mm x 100 m, 30 Micron, ASO 1" Plastic Core, Alox 5 Mil

Machinable materials: Concrete, natural stone and general building materials. Details: Turbo sanding edge for a finer sanding pattern and clean edge finish. Fast dust removal. Reduction ring 22.23?16 mm is supplied with the 100 mm diameter.

The 3M rPPS Kit is the refillable version of the 3M PPS Kit 0.7 litre. A separate opening in the lid allows new material to be filled in again and again. This allows large quantities of mixed paint or filler to be used for large-area applications. After use, you can dispose of the bag and lid as usual and save yourself the tedious cleaning of mixing cups and gun. The closed system prevents lint and dust from being trapped, and the PPS cup system allows you to paint from any position. This allows you to achieve optimum results even in hard-to-reach areas.

For highly efficient liquid filtration from the outside to the inside, use the 3M filter cartridges Series 740.  In applications with high requirements for contaminant separation, our filter cartridges allow higher flow rates than standard products with a diameter of 6.35 cm. This means that significantly fewer filter cartridges are required for a given flow rate.  The filter medium used in the 3M 740 series filter cartridges is based on 3M polypropylene microfibre. Our manufacturing processes enable production according to strictly controlled specifications. The result is a filter media with consistent and predictable particle retention properties. The microfibre media is radially pleated (a 3M innovation) - this optimises the usable filter area of the inserts. End caps, outer sleeves and cores made of polypropylene from the 3M filter cartridge series 740 protect the pleat composite and result in a robust filter construction. A double O-ring seal reduces the risk of liquid bypassing the filter. 3M filter cartridges series 740 are available for particle sizes from 1 μm to 70 μm (with a particle separation efficiency of 99.9 %). The 3M filter cartridges series 740 are pleated polypropylene microfibre depth filters. They are suitable for filter housings that accommodate large filters with an outer diameter of 16.51 cm, a length of 101.6 cm and a 226 O-ring connection.

3M UHMW (ultra-high-molecular-weight) polyethylene sliding tapes have a highly slippery surface due to their low coefficient of friction. They also have excellent abrasion resistance. The optimum combination of these properties makes these adhesive tapes particularly suitable for use as sliding tapes. These tapes are also self-lubricating, resistant to moisture and many chemical agents. They are repellent to most dry or pasty substances and have good puncture and impact resistance. The 3M sliding tapes differ in terms of thickness and different adhesive versions.

Our non-woven sheets are used for cleaning and finishing surfaces with an orbital sander or by hand-held sanding. A variety of specifications offer the user different surface finishing options. The range extends from coarse specifications for cleaning weld seams to ultra-fine and polishing nonwovens.

The 3M lab coat 4440 makes it easy for visitors to comply with hygiene standards in laboratories, hospitals, industry, food production and kitchens. The material made of microporous PE laminate is anti-static and is therefore particularly suitable for use in the production of electronic products. Thanks to its zip fastener, the disposable gown is easy to put on and take off. At the same time, together with the knitted cuffs on the sleeves, it ensures reliable protection against non-hazardous liquids and dust.