3M Microfinishing Film Roll 272L, 50 mm x 50 m, 15 Micron, ASO 3'' Core Keyed Core, Alox 5 Mil

The 3M 4570 protective suit consists of a specially developed multi-layer, non-microporous PE laminate. This not only protects against biological hazards, liquid splashes, particles and liquid spray, but also against strong liquid jets (type 3B). It is also extremely low-linting and antistatic, making it possible to work cleanly, even overhead thanks to the thumb loops. Taped seams, a detachable flap at the neck, a bonded elasticated insert at the hip and elasticated cuffs at the wrists and ankles ensure a perfect seal. Two integrated zip flaps in combination with a double, colour-coded zip also offer reliable protection, while the three-layer hood ensures optimum compatibility with additional eye and breathing protection. The soft yet robust material is extremely quiet and guarantees a very high level of comfort. The protective suit is available in sizes S to 4XL.

3M 261X on a 3 mil film backing with aluminium oxide grain is available in grain sizes 0.3 - 3 - 5 - 9 - 12 - 30 microns. The products are available in either ASO or ASI versions. ASO=Abrasives Side Out, i.e. the grain side is wound outwards, ASI=Abrasives Side In, i.e. the grain side is wound inwards. The inner diameter of the core is 76.2 mm and has 4 driving grooves.

The 3M Hookit Purple Premium 334U / Multihole is a specially developed abrasive for the increased requirements in the car repair sector. It has the improved dust-repellent Fre-Cut non-stick coating and its innovative spiral-shaped multihole perforation supports the suction system of the 3M Hookit Direct Flow II Universal Multihole backing pad. Both prevent premature clogging of the grain surface. As a result, the abrasive disc is characterised by  a noticeably longer service life with consistent continuous cutting performance. Its hook-and-loop backing made of 3M Hookit Brushed Nylon also enables quick and easy replacement without hole alignment, which saves a considerable amount of time. When sanding beads and edges, we also recommend using the  3M Hookit Universal Interface Pad.

Carrying case for the 2200M and 2500E series locators.

The models in the 3M SecureFit 500 safety spectacles series are characterised by a modern design, angle-adjustable ratchet temples and the 3M Temple Pressure Distribution Technology (PDT). This allows the wearer to customise the safety spectacles to the shape of their face. The new models are available in various lens tints and lens coatings. There are models with Scotchgard anti-scratch/anti-fog coating (SGAF), anti-scratch/anti-fog coating (AS/AF) and anti-scratch coating + (AS+). If you are looking for comfortable, functional and compatible eye protection, opt for the 3M SecureFit 500 series. These modern safety spectacles are characterised by a sporty, streamlined lens shape and weigh just 22 g. This gives them a sleek and modern look. The innovative temple pressure distribution technology from 3M offers a secure fit. The temples adapt to the shape and size of the wearer's head and ensure optimised contact pressure. Thanks to the wrap-around temples, the pressure is not exerted on the temples but on the less sensitive back of the head. This makes the safety spectacles light and comfortable to wear and ensures a secure fit even with rapid head movements. The angle-adjustable ratchet temples allow even greater customisation of the fit, as the wearer can adjust the lens to the shape of their face. These safety spectacles can be easily combined with other personal protective equipment.

3M 8926-05 Thermally Conductive Adhesive Film is a 0.50 mm thick adhesive tape which, with its thin PET carrier material, is characterised by good punchability, processability and easy handling. The thermally conductive products in the 3M 8926 series are based on a soft acrylic polymer, are available in different thicknesses and can be applied excellently to different surfaces. Possible replacement for 3M 8940.