3M PELTOR Optime III earmuffs, helmet attachment, black, with helmet adapter, SNR=34 dB, H540P3H-413-SV

They are used to attach PELTOR multi-visors and PELTOR earmuffs with the P3* attachments to 3M safety helmets or the helmets of other selected manufacturers. With this adapter, you can attach the P3 Series X and Optime earmuffs for helmet attachment to all Series M blower headpieces.

The 3M SecureFit safety helmet X5001V-CE provides you with safe and comfortable head protection. The safety helmet is ideal for a wide range of work situations, both for working at height and in locations where heavy machinery is in use or other hazards are to be expected. Our ventilated safety helmet complies with the certification requirements of the EN 12492 and EN 397 standards. Thanks to the special adjustment system with 4-point chin strap, the safety helmet can be easily adjusted to one or the other standard depending on the safety requirements of the workplace. Inspired by modern climbing helmets, the rimless design allows an unobstructed view upwards. This makes it easier to see and avoid potential hazards in the surrounding area. With six different settings, the length of the straps at the front and back can be adjusted to suit different head shapes. With the easily adjustable 6-point ratchet fastening system, the headband can be conveniently adjusted to suit requirements. The exclusive, patented 3M pressure distribution technology is integrated into the helmet. It not only ensures a secure fit, but also improves wearer comfort. This technology reduces the force on the head by up to 20% compared to conventional 3M helmet straps. 3M Scotchlite reflective material increases visibility in low light conditions. This white safety helmet is equipped with a patented 3M UVicator sensor, which changes colour from red to white when exposed to harmful UV radiation. Exposure to UV radiation can cause the helmet shell to become brittle, limiting effective protection. The colour change of the sensor indicates when the helmet should be replaced. The existing notches and brackets for accessories are compatible with a wide range of 3M protective visors, earmuffs and other accessories. Note: The X5000 can be worn in either EN 12492 (mountaineering helmets) or EN 397 (industrial safety helmets) mode, but it cannot fulfil both EN standards at the same time.

The 3M Versaflo helmet head piece M-307 offers respiratory, eye and face protection as well as head protection in accordance with EN397. It is also characterised by its flame-retardant face cover. The flexible, clear polycarbonate visor with a scratch-resistant coating offers optimum protection against mechanical and chemical hazards. Handling is very easy: thanks to a standardised QRS connection, the air hoses can be rotated freely and can be connected and disconnected with one hand. The ratchet fastener allows the headgear to be adjusted quickly and individually. The M-306 is ideal for use in all industrial areas where head protection is required in addition to respiratory, eye and face protection and where sparks or open flames are also likely, for example in tunnelling or foundries. Suitable accessories such as flame protection covers, head, neck and shoulder covers, visor protection foils and ear muffs are available from 3M.

The head, neck and shoulder cover M-976 is an accessory or consumable for the 3M Versaflo headpieces of the M-100 & M-200 and M-300 series. Colour: white.

The 3M Peltor Optime comfort earmuffs for helmet H510P3 have a slim design and wide, soft pads that offer improved wearing comfort. It also has a P3E attachment for attaching to helmets. The flat capsules and the flat, wire-reinforced headband improve compatibility with other personal protective equipment. Noise level is reduced by up to 26 dB. The generous space inside each capsule reduces moisture development and heat build-up.

The perfect system for the "Champions League of welding", heavy-duty welding indoors. The challenging environmental conditions, from high heat and radiation (UV/IR and visible) to flying sparks and fast-flying particles, require a sophisticated system, which we present to you as the first product of the fifth generation Speedglas. This system has been specially developed for arc welding at 300 to 400 amps with a lot of welding fumes and high concentrations of pollutants in the ambient air. Several welders often work side by side on large system components. Visibility is usually poor and lighting conditions are constantly changing. And yet the welders have to work precisely and deliver consistently high quality. With the 3M Speedglas high-performance welding mask G5-01, you are optimally and comfortably protected. An extensive range of accessories allows you to put together "your G5-01". With the help of the new helmet lamp, which is available as an option, you can also integrate your own light source into the helmet. "Replacement for 3M 9100FX Speedglas" In the dark level, you can choose between three different colour tones: natural, cold or warm. You decide which colour shade suits you best for your particular application. In the light level, the natural colour tone is permanently set. With this function, the anti-glare cassette can be customised to different welding processes, materials and lighting conditions, etc. Contours and contrasts are improved. Contours and contrasts are better recognised and the eyes are less strained. This increases both the quality of the welding work and the welder's productivity.