3M PPS Series 2.0 set, standard, 650 ml, 200μ filter, 50 inner cups / 50 lids / 32 sealing caps / 1 outer cup 26000

The 3M Accuspray nozzle head for the PPS 2.0 series ensures excellent atomisation for a wide range of coatings and is an integral part of the 3M Accuspray spray gun system. These interchangeable, reusable nozzle heads are available in a range of sizes for optimum atomisation whether you are applying low viscosity coatings such as water-based materials, solvent-based paints or higher viscosity coatings. The heads are easy to clean, reuse or can be easily removed and replaced to have the performance of a new spray gun when needed. Other benefits include reduced priming requirements, shorter application and cleaning times and a better finish, reducing the need for sanding. Each replaceable nozzle head is made of clear plastic so technicians can always see if the head is clean, reducing the need for cleaning. The 3M Accuspray™ nozzle head for the 3M PPS 2.0 series is available in 3 colour-coded sizes: The 1.4 mm nozzle heads guarantee fine atomisation with minimal spray mist, making them ideal for lower viscosity paints such as sealing lacquers, varnishes, top coats and light adhesives in the automotive industry. The interchangeable 1.8 mm nozzle heads are ideal for medium to high viscosity coatings such as paints and adhesives in the automotive industry. The 2.0 mm nozzle heads are normally used with our 3M Accuspray HGP spray gun, which is specially designed for the application of high volume, high viscosity fluids. Use these heads for the application of gelcoat coatings, adhesives, primers, thick film primers and speciality and sound deadening coatings. Other benefits include less primer required, shorter application and cleaning times and a better finish, which reduces the amount of sanding required. Only compatible with the 3M PPS 2.0 series.

Robust and comfortable - the 3M half mask 6503QL has a strong, stable mask body with a firm but soft face seal. The 6503QL version with the "Quick Release" mechanism enables the mask to be removed quickly and easily during short breaks in work. Straps and the exhalation valve are available as spare parts. This 6503QL version is size L.

The outer cups of the 3M PPS 2.0 series have the mixing ratios printed on each cup to enable the most precise mixing possible.  The reusable cups now have a clear viewing window so you can quickly see how much material is left during the painting process.  The window also provides a vertical view to ensure even mixing of materials - great for metallic and pearl finishes.

The 3M PPS Adapter Series 2.0 converts spray guns into compatible spray guns for the 3M Paint Processing System (PPS) Series 2.0.

3M Acrylic Plus adhesive tape made from a black acrylic foam with additional acrylic adhesives on both sides. Typical applications are fixings of rigid add-on parts such as spoilers, sills, aerial housings, roof rails and wheel arch extensions etc. where an aesthetically pleasing visible edge is required. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces to be bonded. The unique viscoelastic properties of PT1100 provide excellent stress relief in the bonded seam, resulting in extremely durable joints.

With the next generation PREMIUM 2in1 cut-off wheels, you can increase performance while significantly reducing tool wear. With a thickness of 1.0 to 1.6 mm, these super-thin 2in1 cut-off wheels have been developed for processing steel and stainless steel. The chemical purity of these tools is a prerequisite for machining stainless steels. This prevents negative effects on the material such as corrosion, pitting or a reduction in fatigue strength. In addition to a significant increase in productivity, these cut-off wheels offer environmentally friendly working by reducing the amount of waste.