3M PT1100F Acrylic adhesive tape, black, 19 mm x 66 m, 1.1 mm

3M Acrylic Plus adhesive tape made from a black acrylic foam with additional acrylic adhesives on both sides. Typical applications are fixings of rigid add-on parts such as spoilers, sills, aerial housings, roof rails and wheel arch extensions etc. where an aesthetically pleasing visible edge is required. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces to be bonded. The unique viscoelastic properties of PT1100 provide excellent stress relief in the bonded seam, resulting in extremely durable joints.

3M PX5011 is a medium grey, double-sided acrylic foam tape with very good initial and excellent final tack for low and medium energy surfaces. The ZX adhesive - which is anchored on both sides of the tape - can be used without adhesion promoters or surface pre-treatments on difficult-to-bond plastics such as PP/EPDM and on medium-energy plastics such as ABS and automotive paints. The robust foam core guarantees very good wetting and adaptation to the surface geometry of add-on parts such as trim strips and parking sensors. In addition, the PX 5011 adhesive tape is characterised by very good internal strength and excellent long-term stability in hot and cold conditions.

3M Acrylic Plus adhesive tape made from a black acrylic foam  for use on automotive surfaces that are difficult to bond (e.g. powder coatings, clear coats containing nanoparticles, PP, EPDM, etc.). The adhesive tape is suitable for attaching plastic add-on parts such as stone guard strips, bumper protection strips and wheel arch extensions. EX4008 is characterised by very good adhesion to modern, difficult-to-bond automotive surfaces, both for various paint systems and primerless for low-energy plastic surfaces. The foam core guarantees good wetting and adaptation to the surface geometry. In addition, the EX4008 adhesive tape is characterised by good internal strength and good long-term stability. The foam core guarantees good wetting and adaptation to the surface geometry.

The 3M Peltor safety helmet G3001 with 3M Uvicator sensor was developed in close cooperation with industry and forestry and fulfils the highest protection requirements. The G31NUW model made of UV-stabilised ABS plastic is white and equipped with a headband with ratchet fastening system and PVC welding strap. The ratchet fastening system ensures extremely precise and simple adjustment to the wearer's head size. The non-ventilated helmet shell provides reliable insulation against electrical hazards. The extra short peak ensures optimum visibility. The slim, round shape also reduces the risk of getting caught on branches, for example. The 3M Peltor G3001 also offers an advantage when working in confined spaces or climbing in trees: the interior can be rotated through 180° so that the safety helmet can also be worn with the peak on the back of the neck. Thanks to the special profile design, it is also easy to attach earmuffs or visors. Particularly practical: the patented 3M Peltor Uvicator sensor indicates when the helmet has lost its protective effect due to excessive UV radiation and should be replaced. The 3M Peltor safety helmet G3001 with 3M Uvicator can be used, for example, in industry for electrical work up to 440V. The safety helmet has also been tested and approved in accordance with EN50365:2002. The helmet is suitable for head widths from 53 - 62 cm

Fibre discs offer a very simple and quick way to remove material. A low level of vibration ensures comfortable working. This fibre disc was designed for steel and is based on a mixture of zirconium corundum. This fibre disc is available in our range in grit sizes 24 to 120.

tesa 4416 is a surface protection tape for indoor use that has been specially developed for floors and other surfaces that need to be reliably protected against damage, abrasion and dirt. It consists of a white, embossed PP backing and is coated with a removable acrylic adhesive. The embossed backing ensures a good grip and reduces the risk of slipping, especially in safety-relevant areas. The acrylic adhesive adheres well to various surfaces and can be removed without leaving any residue. tesa 4416 complies with category R9 according to DIN EN 16165 and the technical rule for workplaces "Floors" ASR A1.5.

The 3M Xtract pneumatic random orbital sander is a key component of the 3M Xtract sanding system. Together with 3M Xtract mesh discs and the portable 3M Xtract dust extraction unit, this powerful 0.28 HP (209 W) sander enables virtually dust-free sanding.   Robust construction for industrial use. 3M Xtract pneumatic random orbital sanders are equipped with powerful, precision-balanced air motors and durable, lightweight aluminium housings. These high-quality components withstand the long processing times in the workshop. Leave the dust behind. If you want a clean working environment and more efficient sanding, the 3M Xtract pneumatic random orbital sander is for you. Designed for dust extraction as part of the 3M Xtract sanding solution, these sanders connect easily to our 3M Xtract portable dust extraction unit, 3M machine sanding filter bags or your existing centralised dust extraction system. The rear threaded attachment allows for easy and safe attachment and removal of a 1" male threaded hose (sold separately) to effectively remove dust from the workpiece and surrounding area. In combination with 3M Xtract Net Discs and a dust extraction system, the system extracts up to 97 % of the dust generated during sanding. Experience the benefits of 3M Xtract random orbital sanding solutions. 3M is your system provider for all sanding needs. From mesh discs to random orbital sanders to portable dust collection units, we have everything you need to increase productivity and part quality in your shop. 3M's technical experts have decades of application and industry knowledge to ensure you get the right abrasive and the optimal system solution. Applications in focus Metal working and processing Sanding of filler Sanding of gelcoat Sanding of composite materials Woodworking Sanding stroke of 2.5 mm Chrome-plated lever Fine sanding When should you choose a sanding stroke of 2.5 mm? - For the use of fine grits - For the lowest material removal   Sanding stroke of 5 mm Silver lever General sanding work When should you choose a sanding stroke of 5 mm? - The most commonly used sanding stroke - Good ratio of material removal and finish   Sanding stroke of 8 mm Black lever Aggressive sanding When should you choose a sanding stroke of 8 mm? - When more material removal is required than with a sanding stroke of 5 mm - If the sanding should not be as aggressive as with a sanding stroke of 10 mm   Sanding stroke of 10 mm Golden lever Maximum aggressive sanding When should you choose a sanding stroke of 10 mm? - For maximum aggressive material removal - For sanding large surfaces or when a high removal rate is required

In contrast to conventional casting resins for cable accessories, Scotchcast 4 GS epoxy resin is a CMR-free casting resin. It therefore contains no carcinogenic, mutagenic or reprotoxic substances. The resin is characterised by reduced heat development compared to other epoxy resins and is insensitive to water during storage, curing and use (hydrolytically stable).  The popular transparent two-chamber bag contains a predetermined amount of resin and hardener, which can be mixed quickly to form ready-to-use casting resin and is supplemented by an innovative colour indicator that shows exactly when the mixing and curing process is complete. This makes the installation process even more transparent and user-friendly. The 3M Scotchcast 4 GS epoxy resin is used for the insulation and mechanical protection of low-voltage cable connections.

Medium-hard to hard concrete aggregates. Quality tools for everyday use. Drilling speed and service life in a convincing ratio. Universal use, reliable quality. 2.0 mm segment width up to diameter 121 mm and 2.5 mm segment width from diameter 131 mm.