3M Scotch-Brite compact washer DL-WM 203mmx13mmx76.2mm HA 240 #62047

3M VHB high-performance adhesive tapes are double-sided adhesive tapes made of closed-cell acrylate adhesive. They offer good adaptability to the surfaces to be bonded. Smooth or structured surfaces can be bonded over the entire surface without tension. Ideally suited for a variety of materials with high surface energy, such as metals, plastics or glass. This adhesive has been specially developed for use at high temperatures and prior to powder coating.

For the use of cutting discs with VARILEX 1000 and 1802 HT.

The 3M Scotch-Weld Flexible Acrylic Adhesive DP8610NS is a black, non-flowing and low-odour 2-part acrylic adhesive. This high elongation, structural strength acrylic adhesive is ideal for bonding dissimilar materials, joining thin panels where an invisible bond is required and any other application requiring flexible bonds. This unique structural adhesive combines the fast cure and minimal surface preparation of an acrylic adhesive with the typical high flexibility and elongation of urethanes or sealants.

The TYROLIT FAST CHANGE enables very quick disc changes thanks to the Velcro fastener. The thin paper backing makes this disc ideal for fine finishing. You get a very even finish on metals, paints, composite materials, marble and stone. This product gives you a particularly even finish on hard stone, steel and composite materials. In addition, you reduce clogging and clogging of the disc and thus increase the service life.

This high-performance disc with improved service life is used for deburring many materials.

The Scotch-Brite Deburr and Finish PRO compact deburring and finishing disc uses precision-moulded 3M grains bonded to a nylon cloth to deliver increased performance and life for deburring and finishing applications. Our pressed compact discs are soft but as wear resistant as iron to minimise disc changes.   Use the Scotch-Brite PRO compact disc for high grinding performance and long service life in deburring and finishing work. Our smooth-running pressed compact discs remove burrs quickly and cleanly. They are soft to prevent damage, but as strong and wear-resistant as iron and therefore need to be replaced less frequently. They are manufactured with precision-moulded ceramic abrasive grains bonded to a nylon mesh. The hardness of the ceramic material in combination with the self-sharpening grain extends the service life and work can be carried out more quickly without compromising the desired smooth result or the adjustable processing with Scotch-Brite abrasive discs. The PRO compact discs for deburring and finishing are ideal for OEM and pipework renovation and maintenance. These robust high-performance grinding discs reliably remove dirt, corrosion deposits and other contaminants without stressing or impairing the thread form. This means that pipework can be put back into operation more quickly.