3M Scotch-Brite Non-woven tape DF-BL, 6 mm x 520 mm, A, coarse

The 3M Adflo blower unit is respiratory protective equipment which, in combination with an approved headpiece, provides the user with a high level of protection and comfort during welding and related activities. The blower unit has a particle filter, a spark arrester, a pre-filter and a 5-stage filter saturation indicator that shows the user the status of the particle filter. Optional gas filters offer additional protection against common gases and vapours that can occur during welding. Furthermore, an optional odour protection filter can be used to protect the user from unpleasant odours. The blower unit has an automatic air flow control which ensures that the air flow to the head section is always constant. Integrated electronics permanently monitor the battery power and the air flow and immediately trigger a visual and audible alarm if the level falls below set limits. There is a choice of two Li-ion batteries, a standard and a high-performance battery. The unit also has an altitude calibration function that automatically adjusts the function of the device to the respective altitude above sea level. The Adflo blower respiratory protection system draws in the polluted ambient air, passes it through the respective filters and then directs the purified air into the head section via an air hose. For details on the protection levels and possible restrictions on use, please refer to the operating instructions for the head pieces used. Set: 3M Adflo starter pack - 1x Adflo blower respirator 837730 - 1x Air hose QRS 834016 - 1x Adapter QRS 533506 - 1x Air flow meter 838020 - 1x Pre-filter 836010 - 1x spark arrester 836000 - 1x Particle filter 837010 - 1x Li-lon standard battery approx. 8 hours 837630 - 1x Belt 835000 - 1x Charger 833111   - 1x 3M Versaflo safety helmet M407 with flame-retardant neck and shoulder cover and polycarbonate visor, clear

The PREMIUM FASTCUT stands for excellent, specific material removal. This allows you to reach your goal faster, while the disc remains sharp and aggressive throughout its entire service life! The TYROLIT FASTCUT flap disc is the perfect tool for demanding grinding work such as edge grinding and weld seam processing. It can be used on high-alloy steels and stainless steel as well as on unalloyed and low-alloy steels. The additional TOP SIZE coating offers cool grinding. It can also be used on aluminium to a limited extent.

Trapezklingen aus SK2 oder SK2H Stahl · Abmessungen: 60 × 19 × 0.6 mm · Wird in 10er-Packungen geliefert.

3M DBI-SALA FlexiGuard M200 counterweight base with factory concrete filling

3M Acrylic Foam Adhesive Tape, consisting of a light grey acrylic foam with additional acrylic adhesive coatings on both sides. Typical applications include the attachment of add-on parts such as bumpers, mouldings, emblems, etc. 5390 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces to be bonded. The unique viscoelastic properties of 5390 provide excellent stress relief in the bonded joint, resulting in extremely durable bonds.

Klappbares Cuttermesser aus Aluminiumit Platz für drei Trapezklingen. Gürtelclip auf der Rückseite · Kompatibel mit Wolfedge Trapez und Hakenklingen