3M Scotch Tape 3030, green, 48 mm x 50 m

The 3M short visor X5-SV01-CE is moulded from polycarbonate and has an anti-fog and anti-scratch coating. Our transparent visor is suitable for the 3M SecureFit safety helmets of the X5000 and X5500 series. For impact protection in a wide range of applications: 3M short visor X5-SV01-CE. It was specially developed for the 3M SecureFit safety helmets of the X5000 and X5500 series. Our transparent visor is moulded from polycarbonate and has an anti-fog and anti-scratch coating. Available as a spare part to ensure adequate protection and comfort at all times. It fulfils the requirements for optical class 1. Important: The adapter to the helmet is not included. 3M spare part - plug-in attachment adapter without earmuffs P3E (Art. 12548)

The 3M Hookit Purple Premium 334U / Multihole is a specially developed abrasive for the increased requirements in the car repair sector. It has the improved dust-repellent Fre-Cut non-stick coating and its innovative spiral-shaped multihole perforation supports the suction system of the 3M Hookit Direct Flow II Universal Multihole backing pad. Both prevent premature clogging of the grain surface. As a result, the abrasive disc is characterised by  a noticeably longer service life with consistent continuous cutting performance. Its hook-and-loop backing made of 3M Hookit Brushed Nylon also enables quick and easy replacement without hole alignment, which saves a considerable amount of time. When sanding beads and edges, we also recommend using the  3M Hookit Universal Interface Pad.

3M thermally conductive adhesive tapes 8805, 8810 and 8815 were developed  to achieve optimum heat transfer between heat-generating components and heat sinks or other cooling devices.  The adhesive tapes consist of an acrylic adhesive film filled with  thermally conductive ceramic particles. Optimum adhesion to many different substrates is achieved without heat curing. A simple application of pressure is sufficient to create a bond including a thermal bridge.  Due to their special chemical composition,  adhesive tapes 8805, 8810 and 8815 are relatively soft and able to wet many surfaces. The special acrylate adhesive of adhesive tapes 8805, 8810 and 8815 has excellent thermal stability.  The thermally conductive adhesive tapes have two protective covers  made of silicone-treated polyester. They are therefore easy to handle  and easy to die-cut.  The adhesive tapes offer excellent wetting and flow properties on many different surfaces. They also impress with good thermal conductivity and good electrical insulating properties. 3M Thermally Conductive Adhesive Film is designed to create a preferential thermal conductive path between components with high heat dissipation and heat sinks or other cooling devices (e.g. fans, heat spreaders or heat pipes).

The carrier film of this adhesive tape gives foams and other materials increased dimensional stability and also makes the tape easier to handle when cutting and punching.  With a very high initial adhesion, the adhesive strength of the 3M 300LSE adhesive increases even further depending on time and temperature. The 3M double-sided adhesive tape 93015LE is a 150 µm thick, highly adhesive acrylate adhesive from the 300LSE series on a 107 µm thick, PE-coated protective paper.

Find the balance between dust extraction and sanding performance with the 3M Xtract mesh sanding disc 310W. This Advanced Series sanding disc has a mesh backing that enables virtually dust-free sanding. This technology enables you to increase productivity without jeopardising the health of your employees.   High cutting performance. Attractive price. 3M has redefined sanding and eliminated the trade-off between dust extraction and disc performance with a range of mesh abrasives. The Advanced Series abrasives are designed to offer an unbeatable combination of performance and value for a better price/performance ratio. Driven by innovative 3M technologies and technical expertise, the 3M Xtract™ Mesh Abrasive Disc 310W helps you stay competitive in your industry. Enables a safer working environment. A clean working environment is a safer working environment. The 3M Xtract Grid Sanding Disc 310W enables the extraction of more than 95% of the dust generated during sanding, reducing exposure to airborne particles and creating a healthier, virtually dust-free work environment. In addition, the abrasive grain in the disc cuts through the user with less pressure, making sanding more comfortable. Experience the benefits of the 3M Xtract system. 3M™ is your system provider for all needs. From mesh sanding discs to random orbital sanders to portable dust extractors, we offer everything you need to increase productivity and quality in your operation. 3M™ technical experts have decades of application and industry knowledge to ensure you get the right abrasive and the optimal system solution. Applications - Metalworking - Primer sanding - Gelcoat sanding - Composite sanding - Woodworking.

Plastic disc with hook and loop backing, M14 thread and central water supply for use with all 3M diamond grinding discs with hook and loop backing. Flexible sanding thanks to a foam layer between the disc and Velcro backing. The version listed below has an M14 thread.