3M Scotch-Weld 2-component acrylic-based construction adhesive for the EPX System DP 8625 NS, black, 490 ml

Variants

Reset selection

€129.16* % €0.00* (0.00% saved)

Unit price: €129.16* % €0.00*

Unit price (net): €108.54 % €0.00

Contents: 0.49 liter (€263.59* / 1 liter)

Delivery time up to 90 working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Scotch-Weld 2-component acrylic-based construction adhesive for the EPX System DP 8625 NS, black, 490 ml"

Structural strength with the flexibility of a urethane adhesive 3M Scotch-Weld Flexible Acrylic Adhesive DP8625NS is a structural strength adhesive that cures quickly and requires minimal surface preparation. It is an acrylic adhesive that offers high flexibility and elongation comparable to urethanes or sealants. This black, non-flowing and low-odour 2-component acrylic adhesive enables the use of thin panels as it provides a virtually invisible bond line and shrinks only slightly during curing. It is characterised by a 400 % higher elongation capacity and is resistant to stresses that occur with materials with different thermal expansion coefficients. This adhesive requires minimal surface preparation and is not classified as a health hazard under GHS08. It contains 250 µm glass beads for adjusting the bond line thickness. This adhesive has a working time of 23 minutes and reaches handling strength after 28 minutes. It ensures bonding with minimal surface preparation, even on slightly oily surfaces.

Properties

Tough elastic
Highly flexible structural adhesive with an elongation capacity of over 200 %
Improved impact and peel strength
23 minutes working time at room temperature - structural strength after 55 minutes
Reliable performance at low temperatures: new to -40ºC
Mixing ratio 10:1
Important: Mixing nozzle, feed piston and EPX hand applicator are not included with the adhesive. Please order these accessories separately.

Advantages

Non-flammable classification and low-odour formulation: for a better working environment
Reduces the stresses caused by different thermal expansion coefficients
Minimally visible bond line and shrinkage during curing, so thin panels can be bonded
As flexible as a sealant: for greater impact resistance
Temperature: -55 to +120

Product benefits

Fast, strong curing: Faster assembly and higher productivity
Offers innovative design options: Expands your possibilities

Field of application

Bonding of various surfaces with minimal surface preparation, including slightly oily surfaces

Questions about the article?

Signal word

Attention

Hazard pictogram(s)

Ausrufezeichen

Hazard statement / CLP

H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.

Prevention

P280E Wear protective gloves.

Reaction

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 36691

Part number: DP8625490

SAP number: 7100244477

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Selection guide Find safety data sheet

Zubehör

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

Recently viewed products

Tesaband 4651 Premium 19mmx25m yellow

tesaband 4651 is a high-performance premium fabric tape with a plastic coating consisting of a particularly high-quality 148 mesh rayon fabric backing and a natural rubber adhesive.

Contents: 25 meter (€0.46* / 1 meter)

Variants from €9.96*

€11.54*

3M Laser markable color film 7847, black matt/white, 120 mm x 50 m, 0.06 mm

Whether in sun, rain or frost - our label films reliably defy all weather conditions. The black and white matt two-layer film is characterised by its resistance to weathering and ageing, especially for outdoor use. It is suitable for structured, high- and low-energy substrates, for corners, edges and shapes as well as for applications with high requirements for high temperature or solvent resistance. It is printable using laser engraving and can be re-labelled using thermal transfer printing.

Contents: 50 meter (€9.03* / 1 meter)

€451.61*

Tyrolit Rotary dressing DxDxH 250x12x51 Dressing discs for diamond and CBN grinding wheels, shape: 1, Art. 250491

These dressing discs are used for dressing all types of diamond and CBN grinding wheels, regardless of their bond systems. They can also be used to dress sensitive coatings with low grinding pressure. Please note that electroplated discs cannot be dressed with this tool. The silicon carbide discs are available in diameters of 200 - 250 mm.

€31.44*

Tyrolit Hollow chisel stone BxC/C1lL 50x16/5l150 Ceramic bonded, shape: 90HM, Art. 20332

The ceramic hollow chisel stones are preferably used for honing close-toothed tools. The different grit sizes allow you to customise your tool. The conical shape allows you to grind and deburr right down to the base of the tooth.

€19.92*

3M Scotch packaging tape 371, brown, 38 mm x 66 m, 0.048 mm

Scotch Adhesive Tape 371 is a standard packaging tape. The bi-axially stretched polyester film backing is coated with a synthetic rubber adhesive (solvent-free), which has high shear strength and initial adhesion to kraft and testliner cardboard.

Contents: 66 meter (€0.02* / 1 meter)

Variants from €0.82*

€1.30*

3M ET 5 polyester film, transparent, 25 mm x 66 m x 0.06 mm

3M Polyester Film 5 is a particularly thin and elastic insulating tape that is also highly resistant. While the acrylate adhesive is extremely resistant to solvents and "flagging", the carrier is characterised by very high tear and abrasion resistance. The 0.06 millimetre thin adhesive tape can withstand a breakdown voltage of 5,500 volts and belongs to insulation class B with a temperature resistance of up to 130 °C. The transparent polyester film is ideal for fixing connecting wires, as it allows the correct contact assignment to be checked visually.

Contents: 66 meter (€0.31* / 1 meter)

Variants from €9.59*

€20.59*