3M Scotch-Weld 2-component construction adhesive based on epoxy resin 2216 B/A, gray, 1.6 l

Variants

Farbe

Reset selection

€245.88* % €0.00* (0.00% saved)

Unit price: €245.88* % €0.00*

Unit price (net): €206.62 % €0.00

Contents: 1.6 liter (€153.68* / 1 liter)

Ready for immediate dispatch, delivery time approx. 1 - 3 working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Scotch-Weld 2-component construction adhesive based on epoxy resin 2216 B/A, gray, 1.6 l"

3M Scotch-Weld 2216 B/A is a flexible 2-component construction adhesive based on epoxy resin. The product with a very long working time is UL-listed and is characterised by high shear strength and high peel strength. Scotch-Weld 2216 B/A was developed for bonding plastics such as GRP, elastomers, rubber as well as metals, glass, ceramics, wood, etc.

Properties

Processing time of 6 to 8 minutes
Flexible
High peel force
Dynamic and shock load
UL-listed

Advantages

short processing time
Good shear and impact resistance

Product benefits

Compensates for high expansion differences of the joining partners

Field of application

Bonding of plastics such as GRP, elastomers, rubber as well as metals, glass, ceramics, wood, etc.

Questions about the article?

Signal word

Attention

Hazard pictogram(s)

Ausrufezeichen

Umwelt

Hazard statement / CLP

H319 Causes serious eye irritation.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.

Prevention

P280E Wear protective gloves.
P273 Avoid release to the environment.

Reaction

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.

Waste disposal

P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 11549

Part number: 2216GRAU.1,6L

SAP number: 7100141727

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Downloads

Download data sheet as PDF

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M Scotch-Weld 2-component construction adhesive based on epoxy resin 2216 B/A, gray, 59 ml

Farbe: Grau | ml: 59 ml

Contents: 0.059 liter (€850.68* / 1 liter)

€50.19*

3M Scotch-Weld 2-component construction adhesive based on epoxy resin 2216 B/A, gray, 135 ml

Farbe: Grau | ml: 135 ml

Contents: 0.135 liter (€457.04* / 1 liter)

€61.70*

3M Scotch-Weld 2-component construction adhesive based on epoxy resin 2216 B/A, gray, 250 ml

Farbe: Grau | ml: 250 ml

Contents: 0.25 liter (€301.28* / 1 liter)

€75.32*

Recently viewed products

Tyrolit C-P65 P E TFC D 125 For hard stone, steel, composite materials, plastics and soft stone, P80, mould: DISC, Art. 6960

The TYROLIT FAST CHANGE enables very quick disc changes thanks to the Velcro fastener. The thin paper backing makes this disc ideal for fine finishing. You get a very even finish on metals, paints, composite materials, marble and stone. This product gives you a particularly even finish on hard stone, steel and composite materials. In addition, you reduce clogging and clogging of the disc and thus increase the service life.

€0.38*

3M ET 60 PTFE film, brown, 19 mm x 33 m x 0.1 mm

The 3M PTFE film 60 is not only characterised by its extremely high temperature resistance, it also has excellent dielectric strength and extremely high elasticity. It can withstand a breakdown voltage of 9,500 volts and, with a temperature resistance of up to 180 °C, belongs to insulation class H. The adhesive tape is also flame-retardant in accordance with UL 510 and the high-quality silicone adhesive is also extremely resistant to ageing. As the surface of the PTFE backing is very low-energy, no substances such as resin, adhesive or dirt adhere to it. The 0.102 millimetre thick insulating tape is suitable for coils, capacitors and cable bundles that are exposed to high temperatures.

Contents: 33 meter (€4.21* / 1 meter)

Variants from €42.36*

€138.83*

Tyrolit Cup shaft brushes DxLxH-GExI 60x15x20-6x30 For steel, shape: 52TDW - (cup shaft brushes), Art. 890763

Cup shaft brushes are suitable for hard-to-reach areas. This product provides you with a tool that can be used on straight grinders and drills. Crimped cup brushes are suitable for cleaning work such as removing paint, rust, scale, encrustations or for deburring.

€12.27*

3M Diamond Grade DG³ Reflective Film 4083, Fluorescent Yellow/Green (selective yellow), 1220 mm x 45.7 m

The 3M Diamond Grade DG³ reflective film with the latest 3M technology utilises cat's eye optics to maximise the amount of light reflected back to the driver. Suitable for all traffic situations in and out of town and on motorways, DG³ reflective film offers very wide viewing angles and outstanding performance at all distances and in all weather conditions. Signs are very easy to recognise even in difficult visibility conditions on roads at night. 3M Diamond Grade DG³ Reflective Film Series 4000 is approved for the production of traffic signs in accordance with the European Technical Approval (ETA). Microprismatic reflective film according to DIN 67520 (RA3,C) and DIN 6171, part 1 Technical information: SG 92 Screen printing colour: Series 880i

Contents: 45.7 meter (€103.79* / 1 meter)

Variants from €2,375.63*

€4,743.07*

NORSE Flex Supreme assembly gloves size 10

Universeller Arbeitshandschuh aus nahtlosem Nylon/Elasthan-Gestrick mit Nitrilbeschichtung an Handfläche und Fingerspitzen. Gerippter Rand aus Polyester mit Gummizug

Variants from €3.19*

€2.24*

Tyrolit Conventional ceramic grinding discs DxDxH 150x25x32 For carbide and cast iron, shape: 1, Art. 2751

When sharpening solid carbide or carbide-tipped tools, only discs with silicon carbide specifications should be used. Due to their special grain shape, you will achieve good results even on very hard workpieces. This disc can also be used for cast iron. A reduction ring set is already included in the packaging and can also be reordered.

€22.40*