3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 420, white, 50 ml
Variants
3M Scotch-Weld DP420 is an impact-resistant 2-component epoxy-based construction adhesive. The product is characterised by good fatigue resistance. The use of DP 420 replaces mechanical connections such as screws, rivets, spot welds etc. Dosing - mixing - application in just one operation - for consistent and defined quality. High shear strength - Good peel strength - Good impact strength Hand strength after 30 minutes Bonding of metals, plastics such as ABS, PA, PC, rigid PVC etc. as well as fibre composites, ceramics, wood and glass 3M Scotch-Weld DP 420 meets the requirements of UL 94 HB
- High shear and peel strength
- Good ageing properties
- Processing time at room temperature 20 minutes with sufficient time for exact positioning of the parts to be joined
- Non-flowing
- Mixing ratio 2:1
Important: Mixing nozzle, feed piston and EPX hand applicator are not included with the adhesive. Please order these accessories separately.
- Curing at room temperature
- Curing can be accelerated by applying heat.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
P260A Do not breathe vapour.
P280D Wear protective gloves, protective clothing and eye/face protection.
P303 + P361 + P353A IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.
Log in