3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX system DP 460, beige, 50 ml

Variants

Reset selection

€31.27* % €0.00* (0.00% saved)

Unit price: €31.27* % €0.00*

Unit price (net): €26.28 % €0.00

Contents: 0.05 liter (€625.40* / 1 liter)

Ready for immediate dispatch, delivery time approx. 1 - 3 working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX system DP 460, beige, 50 ml"

3M Scotch-Weld DP460 is a viscoplastic 2-component construction adhesive based on epoxy resin for the EPX system. The product with a long processing time achieves very high peel strength, high shear strength and is characterised by good ageing properties. Scotch-Weld DP 460 is UL-specified and has been developed for bonding metals such as aluminium, steel etc., plastics such as ABS, PA, PC, rigid PVC etc. and fibre composites.

Properties

Processing time of 60 minutes
Tough elastic
High shear strength
Good peel strength
Good impact resistance
UL-listed
Good ageing properties
Mixing ratio 2:1
Important: Mixing nozzle, feed piston and EPX hand applicator are not included with the adhesive. Please order these accessories separately.

Advantages

Long processing time

Product benefits

Long processing time allows joining of large surfaces
Exact positioning of the parts to be joined possible

Field of application

Bonding of metals such as aluminium, steel etc., plastics such as ABS, PA, PC, rigid PVC etc. and fibre composites

Questions about the article?

Signal word

Danger

Hazard pictogram(s)

Ätzwirkung

Ausrufezeichen

Umwelt

Hazard statement / CLP

H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.

Prevention

P260A Do not breathe vapour.
P280D Wear protective gloves, protective clothing and eye/face protection.

Reaction

P303 + P361 + P353A IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P310 Immediately call a POISON CENTRE or doctor.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.

4 from 4 Reviews

4.75 from 5 Stars

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

Sorted by

Mittwoch, 17. Mai 2023

Richard R.

Alles super, gerne wieder!

Dienstag, 7. Februar 2023

Robert R.

Bisschen teuer aber super.

Benutze ich schon lange, habe ich bei Air Berlin kennen gelernt. Jetzt ist es mein Lieblingskleber beim Modellbau. Die Klebkraft ist der Wahnsinn, dabei bleibt ein Rest Flexibilität.

Montag, 29. August 2022

Reinhard F.

Technisch absolut perfekt für Elektronikkomponenten auf Platinen - aber zu teuer

Der Klebstoff wird benutzt, um elektronische Bauteile auf einer Platine mechanisch zu fixieren. Der Kleber haftet sowohl auf dem Lötstoplack (Platinenoberfläche) als auch auf eloxiertem Aluminium (Kühlkörper). Großer Vorteil: Bei Verbindung zwischen zwei benachbarten Bauteilen fließt/tropft er nicht nach unten. Mit der Änderung des Verschlussstopfens gibt es jetzt auch keine Verbindung der zwei Komponenten mehr an den beiden Auslässen. Von der Anwendung her bin ich begeistert. Aber es sind nur 4 Sterne geworden, weil der Preis schon sehr, sehr hoch für einen Klebstoff ist.

Donnerstag, 4. März 2021

Robert Radebold

Genau richtig

Ich benutze den Kleber im Modellbau sehr gern. Damit hält alles Bombenfest bleibt aber auch ein bisschen flexibel.

Article no: 10795

Part number: 460.50

SAP number: 7100200496

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX system DP 410, beige, 50 ml

Farbe: Beige | ml: 50 ml

3M Scotch-Weld DP410 is a viscoplastic 2-component construction adhesive based on epoxy resin for the EPX system. The product with short processing time achieves very high peel strength, high shear strength and is characterised by good ageing properties. Scotch-Weld DP 410 was developed for bonding metals, plastics such as ABS, PA, PC, rigid PVC etc. as well as fibre composites.

Contents: 0.05 liter (€640.00* / 1 liter)

€32.00*

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX system DP490, black, 50 ml

Farbe: Schwarz | ml: 50 ml

3M Scotch-Weld DP490 is a viscoplastic and thixotropic 2-component construction adhesive based on epoxy resin for the EPX system. The product with a very long working time (> 90 minutes) achieves very high peel strength, high shear strength and is characterised by its high temperature resistance. Scotch-Weld DP 490 was developed for bonding metals such as aluminium, steel and brass, plastics such as ABS, PA, PC, rigid PVC etc. and fibre composites.

Contents: 0.05 liter (€625.40* / 1 liter)

€31.27*

EPX hand-held device 35 to 50 ml cartridges incl. feed piston 1:1/2:1 and 10:1

The hand-held processing device for EPX was developed for processing 38 ml to 50 ml cartridges. With the EPX system, the adhesive is dispensed, mixed and applied to the materials to be bonded. The choice of mixing nozzle and feed piston depends on the adhesive. The manual application device enables mobile and independent bonding and also includes the 1:1 / 2:1 / 10:1 feed piston.

€83.63*

3M Scotch-Weld EPX feed plunger for hand tool 1:2 and 1:1 for 50ml cartridges DP100 DP105 DP110 DP125 DP190 DP270 DP410 DP460 DP460EG DP490 DP760 DP609 DP610 DP620NS TC-2810 TC-2707 9323

3M Scotch-Weld 2-component construction adhesives can be processed with the EPX system: dosing - mixing - application takes place in just one work step. Use this feed plunger for all adhesives with a 1:1 / 2:1 mixing ratio.

€10.98*

3M Scotch-Weld EPX mixing nozzle 48.5 - 50ml DP100 DP105 DP110 DP125 DP190 DP270 DP410 DP420 DP420NS DP460 DP490 DP604NS DP609 DP610 DP620NS DP760 DP804 DP810 DP6310NS DP6330NS TC2810 TC2707 9323

3M Scotch-Weld 2-component construction adhesives are processed with the EPX system: dosing - mixing - application takes place in just one work step. The actual construction adhesive is created within the mixing nozzle for 48.5 ml cartridges through the chemical reaction of both components.

€1.34*

3M Scotch-Weld EPX compressed air gun for 50 ml cartridges, 2:1 and 1:1

3M Scotch-Weld 2-component structural adhesives can be processed with the EPX system: simple - fast - clean. The EPX compressed air gun facilitates structural bonding when using the 35 ml / 38 ml / 47 ml / 50 ml cartridges.

€297.48*

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 420, black, 50 ml

Farbe: Schwarz | ml: 50 ml

3M Scotch-Weld DP420 is an impact-resistant 2-component epoxy-based construction adhesive. The product is characterised by good fatigue resistance. The use of DP 420 replaces mechanical connections such as screws, rivets, spot welds etc. Dosing - mixing - application in just one operation - for consistent and defined quality. High shear strength - Good peel strength - Good impact strength Hand strength after 30 minutes Bonding of metals, plastics such as ABS, PA, PC, rigid PVC etc. as well as fibre composites, ceramics, wood and glass 3M Scotch-Weld DP 420 meets the requirements of UL 94 HB

Contents: 0.05 liter (€625.40* / 1 liter)

€31.27*

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX system DP 460, beige, 400 ml

Farbe: Beige | ml: 400 ml

Contents: 0.4 liter (€322.98* / 1 liter)

Variants from €31.27*

€129.19*

Recently viewed products

S-K-S transfer adhesive tape 2283 LE20, transparent, 50 mm x 50 m, 0.30 mm

S-K-S 2283 High-quality transfer adhesive tape that adapts perfectly to all material contours. Consists of a acrylic adhesive, high temperature and UV resistance, and is characterised by very good solvent resistance. These adhesive films have a very high adhesive strength on most material surfaces, including low-energy surfaces.

Contents: 50 meter (€1.70* / 1 meter)

Variants from €11.21*

€84.91*

3M Scotch All Purpose Soft PVC Tape 764i 50,8mmx33mm green

PVC adhesive tapes offer a wide range of applications due to their solvent resistance, colour quality, elasticity and abrasion resistance.

Contents: 33 meter (€0.20* / 1 meter)

Variants from €5.69*

€6.50*

Tyrolit Accessories DxH 115x22 For FIBRE DISC, hardness: HARD, shape: PAD, Art. 709999

The BASIC backing pad is a good addition to all our fibre discs. Especially for surface finishing, this accessory provides good support for achieving the best results.

€5.99*

3M Cubitron II Hookit Purple+ Premium sanding discs Multihole 737U, 76 mm, 120+

Sanding filler, removing paint and sanding edges - with the 3M Cubitron II Hookit Purple+ Premium sanding disc Multihole 737U. Our sanding disc with precision-formed abrasive grain and multihole perforation can also be used for final preparation before priming. It delivers outstanding sanding results, is 30 % faster than other premium abrasives and has a long service life in all steps of the repair process. The surface of the sanding disc is equipped with our precision-moulded ceramic abrasive grain. It consists of triangular-shaped abrasive grains that are electrostatically aligned. Each abrasive grain functions as an independent cutting tool that penetrates paint and filler with precision. The multihole perforation of our sanding disc ensures excellent dust extraction and thus contributes to a higher removal rate and longer service life. The 3M Cubitron II Hookit Purple+ Premium Multihole 737U sanding discs are available in grit sizes 80+ to 220+. The back of the abrasive disc features our Hookit technology. This hook and loop system was developed for work areas where discs with a self-adhesive backing can be contaminated by dust, dirt or particles in the air. Hookit sanding discs attach firmly to a velcro backing pad (sold separately) on a random orbital sander and can be removed cleanly and easily and reused throughout the life of the abrasive.

€0.49*

Tyrolit Serrated lock washer DxH 115x22.23 CERAMIC for stainless steel, P80, shape: 27A - cranked design (glass fibre carrier body design), Art. 34166620

Thanks to the self-sharpening ceramic abrasive grain, the PREMIUM CERAMIC flap disc is particularly suitable for stainless steels and demanding grinding applications. With an additional TOP SIZE coating, this product offers cool grinding, which enables a longer tool life and reduces discolouration of the workpiece surface. Self-sharpening of the abrasive grain over the entire service life of the disc results in a more uniform surface finish.

€3.72*

3M contact arm, long, 16mmx521mm, 19mmx521mm #28373

Thanks to a large selection of contact arms, flexible working on different workpieces is possible. The strip width and length varies from 3 - 19 mm and from 457 - 610 mm respectively.

€90.89*