3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX system DP490, black, 50 ml

Variants

Reset selection
€31.27* % €0.00* (0.00% saved)
Unit price: €31.27* % €0.00*
Unit price (net): €26.28 % €0.00
Contents: 0.05 liter (€625.40* / 1 liter)

Ready for immediate dispatch, delivery time approx. 1 - 3 working days


So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.
Product information "3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX system DP490, black, 50 ml"

3M Scotch-Weld DP490 is a viscoplastic and thixotropic 2-component construction adhesive based on epoxy resin for the EPX system. The product with a very long working time (> 90 minutes) achieves very high peel strength, high shear strength and is characterised by its high temperature resistance. Scotch-Weld DP 490 was developed for bonding metals such as aluminium, steel and brass, plastics such as ABS, PA, PC, rigid PVC etc. and fibre composites.

Properties
  • Processing time of more than 90 minutes
  • Tough elastic
  • High shear strength
  • Good peel strength
  • Good impact resistance
  • Mixing ratio 2:1
  • Contains glass beads for adjusting the adhesive layer thickness
  • Important: Mixing nozzle, feed piston and EPX hand applicator are not included with the adhesive. Please order these accessories separately.

Advantages
  • Very long working time (greater than 90 minutes)
  • Thixotropic: Does not flow on vertical surfaces
  • High temperature resistance up to 120 °C
Product benefits
  • Particularly high-performance product for the highest requirements
  • Thixotropic: no running of the adhesive
  • High temperature resistance allows greater stress on the bond
Field of application
  • Bonding of metals such as aluminium, steel and brass, plastics such as ABS, PA, PC, rigid PVC etc. and fibre composites
Signal word
Danger
Hazard pictogram(s)

Ätzwirkung

Ausrufezeichen

Hazard statement / CLP

H314 Causes severe skin burns and eye damage. 
H317 May cause an allergic skin reaction. 
H336 May cause drowsiness or dizziness.

Prevention

P260A Do not breathe vapour. 
P280D Wear protective gloves, protective clothing and eye/face protection.

Reaction

P303 + P361 + P353A IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. 
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. 
P310 Immediately call a POISON CENTER or doctor. 
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.

3 from 3 Reviews

5 from 5 Stars


100%

0%

0%

0%

0%


Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Sonntag, 18. Februar 2024

Meinhard K.

Sehr schnelle Lieferung, Produkt wie erwartet. Gerne

Sehr schnelle Lieferung, Produkt wie erwartet. Gerne wieder.

Samstag, 4. März 2023

Marc E.

immer gerne wieder

Top Produkt

Montag, 25. April 2022

Niklas

Top,

schnelle Abwicklung, sehr zufrieden

Article no: 10749
Part number: 490.50
SAP number: 7100200499
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
Enquiry form

Zubehör

3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX system DP 410, beige, 50 ml
Farbe: Beige | ml: 50 ml
3M Scotch-Weld DP410 is a viscoplastic 2-component construction adhesive based on epoxy resin for the EPX system. The product with short processing time achieves very high peel strength, high shear strength and is characterised by good ageing properties. Scotch-Weld DP 410 was developed for bonding metals, plastics such as ABS, PA, PC, rigid PVC etc. as well as fibre composites.

Contents: 0.05 liter (€640.00* / 1 liter)

€32.00*
3M Scotch-Weld EPX compressed air gun for 50 ml cartridges, 2:1 and 1:1
3M Scotch-Weld 2-component structural adhesives can be processed with the EPX system: simple - fast - clean. The EPX compressed air gun facilitates structural bonding when using the 35 ml / 38 ml / 47 ml / 50 ml cartridges.

€297.48*
3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX system DP 460, beige, 50 ml
Farbe: Beige | ml: 50 ml
3M Scotch-Weld DP460 is a viscoplastic 2-component construction adhesive based on epoxy resin for the EPX system. The product with a long processing time achieves very high peel strength, high shear strength and is characterised by good ageing properties. Scotch-Weld DP 460 is UL-specified and has been developed for bonding metals such as aluminium, steel etc., plastics such as ABS, PA, PC, rigid PVC etc. and fibre composites.

Contents: 0.05 liter (€625.40* / 1 liter)

€31.27*
3M Scotch-Weld EPX feed piston for hand-held device 1:2 and 1:1 for 50ml cartridges DP100 DP105 DP110 DP125 DP190 DP270 DP410 DP460 DP460EG DP490 DP760 DP609 DP610 DP620NS TC-2810 TC-2707 9323
3M Scotch-Weld 2-component construction adhesives can be processed with the EPX system: dosing - mixing - application takes place in just one work step. Use this feed plunger for all adhesives with a 1:1 / 2:1 mixing ratio.

€10.98*
EPX hand-held device 35 to 50 ml cartridges incl. feed piston 1:1/2:1 and 10:1
The hand-held processing device for EPX was developed for processing 38 ml to 50 ml cartridges. With the EPX system, the adhesive is dispensed, mixed and applied to the materials to be bonded. The choice of mixing nozzle and feed piston depends on the adhesive. The manual application device enables mobile and independent bonding and also includes the 1:1 / 2:1 / 10:1 feed piston.

€83.63*
3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 420, white, 50 ml
Farbe: Weiß | ml: 50 ml
3M Scotch-Weld DP420 is an impact-resistant 2-component epoxy-based construction adhesive. The product is characterised by good fatigue resistance. The use of DP 420 replaces mechanical connections such as screws, rivets, spot welds etc. Dosing - mixing - application in just one operation - for consistent and defined quality. High shear strength - Good peel strength - Good impact strength Hand strength after 30 minutes Bonding of metals, plastics such as ABS, PA, PC, rigid PVC etc. as well as fibre composites, ceramics, wood and glass 3M Scotch-Weld DP 420 meets the requirements of UL 94 HB  

Contents: 0.05 liter (€625.40* / 1 liter)

€31.27*
3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX System DP 490, black, 400 ml
Farbe: Schwarz | ml: 400 ml
3M Scotch-Weld DP490 is a viscoplastic and thixotropic 2-component construction adhesive based on epoxy resin for the EPX system. The product with a very long working time (> 90 minutes) achieves very high peel strength, high shear strength and is characterised by its high temperature resistance. Scotch-Weld DP 490 was developed for bonding metals such as aluminium, steel and brass, plastics such as ABS, PA, PC, rigid PVC etc. and fibre composites.

Contents: 0.4 liter (€322.98* / 1 liter)

Variants from €31.27*
€129.19*
3M Scotch-Weld EPX mixing nozzle 48.5 - 50ml DP100 DP105 DP110 DP125 DP190 DP270 DP410 DP420 DP420NS DP460 DP490 DP604NS DP609 DP610 DP620NS DP760 DP804 DP810 DP6310NS DP6330NS TC2810 TC2707 9323
3M Scotch-Weld 2-component construction adhesives are processed with the EPX system: dosing - mixing - application takes place in just one work step. The actual construction adhesive is created within the mixing nozzle for 48.5 ml cartridges through the chemical reaction of both components.

€1.34*

Customers also bought

3M Scotch-Weld EPX mixing nozzle 48.5 - 50ml DP100 DP105 DP110 DP125 DP190 DP270 DP410 DP420 DP420NS DP460 DP490 DP604NS DP609 DP610 DP620NS DP760 DP804 DP810 DP6310NS DP6330NS TC2810 TC2707 9323
3M Scotch-Weld 2-component construction adhesives are processed with the EPX system: dosing - mixing - application takes place in just one work step. The actual construction adhesive is created within the mixing nozzle for 48.5 ml cartridges through the chemical reaction of both components.

€1.34*
Starter set: 1x 3M Scotch-Weld 2-component construction adhesive EPX System DP490, black, 50 ml, 1x S-K-S hand tool for EPX 38 to 50 ml cartridges incl. feed piston 2:1
3M Scotch-Weld DP490 is a viscoplastic and thixotropic 2-component construction adhesive based on epoxy resin for the EPX system. The product with a very long working time (> 90 minutes) achieves very high peel strength, high shear strength and is characterised by its high temperature resistance. Scotch-Weld DP 490 was developed for bonding metals such as aluminium, steel and brass, plastics such as ABS, PA, PC, rigid PVC etc. and fibre composites. Contents Starter Set: 1x 3M Scotch-Weld 2-component construction adhesive based on epoxy resin for the EPX system DP490, black, 50 ml Art. 10749 1x S-K-S hand tool for EPX 38 to 50ml cartridges incl. feed piston 2:1 & 10:1 Art. 11537 3x 3M Scotch-Weld EPX mixing nozzle 48.5 - 50ml Art. 41699

Contents: 0.05 liter (€1,368.00* / 1 liter)

Variants from €31.27*
€68.40*
S-K-S professional cutter knife metal 18mm, incl. one snap-off blade, 15 segments l 14 snap-off points
The cutter knife consists of a metal housing. The knife handle is ergonomically shaped and sits securely in the hand thanks to its non-slip surface.

€4.74*
S-K-S hand-held device for EPX 38 to 50ml cartridges incl. feed piston 2:1/1:1
S-K-S manual processing device was developed for processing 38 ml to 50 ml cartridges. With the EPX system, the adhesive is dispensed, mixed and applied to the materials to be bonded. The choice of mixing nozzle and feed piston depends on the adhesive. The manual application device enables mobile and independent bonding and also includes the 2:1 & 10:1 feed piston. The processing of 1:1 cartridges is possible with the 2:1.

€35.77*
EPX hand-held device 35 to 50 ml cartridges incl. feed piston 1:1/2:1 and 10:1
The hand-held processing device for EPX was developed for processing 38 ml to 50 ml cartridges. With the EPX system, the adhesive is dispensed, mixed and applied to the materials to be bonded. The choice of mixing nozzle and feed piston depends on the adhesive. The manual application device enables mobile and independent bonding and also includes the 1:1 / 2:1 / 10:1 feed piston.

€83.63*
S-K-S Waiter's knife l Metal bottle opener
Metal waiter's knife with bottle opener, foil cutter and corkscrew with 2 lifting steps. Corks and crown caps can be elegantly removed with the waiter's knives

€4.00*