Scotch-Weld 9348 is a primer that dries quickly at room temperature and has been developed to improve adhesion to plastics such as rigid and flexible PVC, polycarbonate, polyurethane or polyester for double-sided adhesive tapes and acrylate-based adhesive films. Resistant to plasticisers and oil, does not bleed through, does not discolour.
- Application methods: brushing, spraying
- Coverage: 15 - 20 m²/l
- Bonding time: up to 10 min
- Temperature range: from -30°C to 80°C
- Consistency: low viscosity
- Solvents: MEK, acetone, tetrahydrofuran
- Flash point: -18°C
- Colour: clear
- Resistant to plasticisers and oil, does not bleed through, does not discolour
- Plastics such as hard and soft PVC, polycarbonate, polyurethane or polyester
H225 Highly flammable liquid and vapour.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H351 Suspected of causing cancer.
P210A Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261E Avoid breathing vapour/spray.
P280E Wear protective gloves.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P370+ P378G In case of fire: Use extinguishing media for flammable liquids such as dry chemical or carbon dioxide to extinguish.
Log in