3M Scotchcast 92-NBA 6 Cast resin connection set, 0.6/1 kV, 4x 70 - 120 mmÂ²

Variants

Typ

Reset selection

€233.87* % €0.00* (0.00% saved)

Unit price: €233.87* % €0.00*

Unit price (net): €196.53 % €0.00

Delivery time 2-5 days working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Scotchcast 92-NBA 6 Cast resin connection set, 0.6/1 kV, 4x 70 - 120 mmÂ²"

The 3M Scotchcast 92-NBA series cast resin connector set is designed for one to five-core, unshielded low-voltage plastic cables. It ensures the electrical insulation and mechanical protection of cable connections. The SVHC-free premium connection set, tested in accordance with EN 50393, can be used indoors and outdoors as well as in the ground or under water. The transparent, one-piece moulded shell can be folded up in no time at all and closes by automatically snapping into place. Pre-moulded, perforated foam seals are also used. This eliminates the previously time-consuming use of saws and adhesive tape for a tight seal. A GMG system (closed mixing and moulding) is used when casting the 3M Scotchcast casting resin 40 included in the scope of delivery. This virtually eliminates contact with the casting resin during processing. The transparent mixing bag guarantees visual control of the mixing process. After use, the mixing bag can be disposed of with the cured casting resin residue as normal household waste. Disposal as hazardous waste is not necessary.

Properties

Casting resin no. 40 in a transparent two-chamber bag with closed mixing and casting system (GMG)
One-piece, transparent casting tray with integrated hinges
Optimised GMG system (closed mixing and pouring)

Advantages

Pre-moulded, perforated foam seals
Central potting spigot
SVHC free

Product benefits

Tested according to EN 50393

Questions about the article?

Signal word

Danger

Hazard pictogram(s)

Ausrufezeichen

Gesundheitsgefahr

Hazard statement / CLP

H332 Harmful if inhaled.
H319 Causes serious eye irritation.
H315 Causes skin irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H317 May cause an allergic skin reaction.
H335 May cause respiratory irritation.
H351 Suspected of causing cancer.
H373 May cause damage to organs through prolonged or repeated exposure: Respiratory system

Prevention

P260A Do not breathe vapour.
P280E Wear protective gloves.

Reaction

P303 + P361 + P353A IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 76356

Part number: 92-NBA6

SAP number: 7000035343

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

Recently viewed products

3M 5491 PTFE extruded film adhesive tape 19mmx33m, 0.17mm, silicone

3M 5490 and 5491 are extruded Teflon film adhesive tapes with highly heat-resistant silicone adhesive, which differ mainly in thickness. They have excellent chemical resistance, a low coefficient of friction and good adhesive-repellent properties. As the Teflon film is extruded, the tapes have an extremely smooth surface and do not curl up when unwound.

Contents: 33 meter (€5.45* / 1 meter)

Variants from €86.10*

€179.90*

3M Scotch-Brite Precision non-woven disc, PN-DH, very fine, 115 mm x 22.23 mm

Newly developed for your requirements. Introducing the next step in surface finishing technologies: Scotch-Brite precision non-woven discs. This new addition to the Scotch-Brite range promises the consistency you have come to expect, with faster stock removal and longer abrasive life. By combining two outstanding 3M technologies - fleece and the 3M precision-moulded ceramic grain - you can now achieve an ideal finish even faster. To help you work even more efficiently, these discs are available in brighter, more vibrant colours to make them easier to distinguish. In addition, the range of grits has been extended to include fine and extra coarse versions, giving you an even wider choice of solutions for your abrasive needs. Improve your work processes. These high quality general purpose abrasive discs are designed to optimise the steps involved in surface finishing, including cleaning, blending, deburring and finishing. Typical substrates include aluminium and soft metals, carbon steel and stainless steel. Applications range from the removal of coatings and corrosion to the finishing and post-processing of castings.

Variants from €3.52*

€3.26*

Tyrolit Non-woven pins DxD 80x50 For steel, stainless steel and non-ferrous metals, P240, A VERY FINE, shape: 52LA, Art. 908823

TYROLIT fleece pins are highly adaptable and ensure that there is no change to the surface finish. The TYROLIT Premium range is now being extended by 29 types to provide you with a choice of different grit sizes and other dimensions. The large number of grit gradations means that different surface structures and roughnesses can be achieved. TYROLIT fleece points are also available with an inserted abrasive cloth to achieve higher material removal and a coarser surface finish.

€11.90*

3M Double-sided adhesive tape with non-woven paper backing 9086, white, 9 mm x 50 m, 0.19 mm

The 3M double-sided adhesive tape with paper fleece backing 9086 is a universal adhesive tape that adheres to many different materials. These include substrates made of metal, plastic, paper, cardboard, wood and painted surfaces. Possible areas of application include the self-adhesive fitting of furniture mouldings, cable ducts or sealing profiles as well as the mounting, assembling and fixing of advertising materials such as displays, samples or posters. The adhesive tape has a very high initial tack and shear strength and is also characterised by good plasticiser and UV resistance. Its colour-coded protective paper makes it easy to identify the adhesive tape. The protective cover is made of white paper with a black 3M logo. Colour of the adhesive tape: white.

Contents: 50 meter (€0.13* / 1 meter)

Variants from €4.78*

€6.53*

3M Post-it Index Mini 684-CAN5, 5 x 20 solid-coloured adhesive strips in a case, Candy Collection, 11.9 mm x 43.2 mm

Beautiful to bite into: The Candy Collection from Post-it Index Mini organises any document with its colourful patterns. Whether at home, when travelling or in the office - with the stylish Post-it Index adhesive strips you can structure your books, catalogues or documents clearly and decoratively. With the Candy Collection from Post-it Index Mini, you can decoratively structure and organise any document. The eye-catching adhesive strips come in a handy case and are ideal for marking pages and text passages. Their narrow character brings more structure to your documents.

Contents: 0.0432 meter (€101.39* / 1 meter)

€4.38*

3M Roloc grinding wheel 361F, 38.1 mm, P120 #22409

Quick-change disc with excellent price-performance ratio. Colour coding makes it easy to differentiate between grit sizes. Equipped with aluminium oxide grit and cloth backing for general sanding and removal work.

Variants from €0.82*

€0.86*