Product information "3M Scotchflex FS 280 BW-C cable tie, UV-resistant, black, 3.6 mm x 280 mm, pack=100 pieces"
The 3M Scotchflex cable ties black, UV-resistant are made of polyamide 6/6, a tear-resistant nylon. Thanks to the grid fastening principle, you can easily set any desired capacity. This makes the UL E97527-certified cable ties ideal for bundling multiple cables. Cable ties with grid closure for bundling multiple cables.
Share your experience with the product with other customers.
Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.
Log in
No reviews found. Go ahead and share your findings with others.
Article no:
76336
Part number:
FS280BW-C
SAP number:
7000035294
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use
The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.
Breite in mm:
158 mm
|
Farbe:
Red
|
Körnung:
Very fine
|
Länge in m:
0,224 m
Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.
The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.
For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.
3M Scotch-Weld DP270 is a hard 2-component construction adhesive based on epoxy resin for the EPX system. The product with a long processing time is also used as a potting compound for electronics and has good thermal and electrical properties even when exposed to moisture. Furthermore, the potting compound develops only a low exothermic reaction during curing and does not corrode copper. Scotch-Weld DP 270 is UL-listed and was developed for bonding metals as well as for potting and protecting electrical and electronic components.
The adhesive film without carrier 3M 927 has a transparent adhesive film and good adhesion to low-energy materials (e.g. PE, PP). The 0.05 mm thick adhesive film is temperature-resistant up to +80°C (+120°C for short periods) and is characterised by its very high immediate adhesion.
3M polyimide film 92 is characterised above all by its extreme temperature resistance and very good dielectric properties. In conjunction with a high-quality silicone adhesive, it forms a high-performance combination of mechanical, electrical, thermal and chemical properties, which remain stable in a temperature range from -40 °C to +180 °C. The insulating tape therefore belongs to insulating material class H. The 0.076 millimetre thin adhesive tape can withstand a breakdown voltage of 7,500 volts and is flame-retardant in accordance with UL 510. The polyimide film is therefore suitable for applications where it is exposed to high temperature fluctuations, particularly for masking contacts when soldering circuit boards. As it is printable, it can also be used for cable bundling and labelling, among other things.
The anti-slip tape consists of anti-slip aluminium oxides in a tough, durable polymer, firmly bonded to a flexible PVC film. The reverse side is equipped with a pressure-sensitive adhesive based on solvent acrylate, which in turn is protected by a removable liner. The anti-slip tape provides a non-slip surface for a variety of applications. Durable anti-slip coating for all smooth, wet or smeared surfaces in industry and commerce with intensive pedestrian and light vehicle traffic. wherever a permanently good slip resistance is required despite heavy use and heavy soiling (in agriculture and forestry, in road construction, building construction and civil engineering, on lorries, tractors, construction vehicles, cranes, construction machinery, etc.). For outdoor applications, we recommend 3M Safety Walk edge protection.
Das 3M Cubitron II Trennschleifer-Set ist ein Starterset, welches sich perfekt für Trennanwendungen im Karosseriebereich eignet. Neben dem Trennschleifer befinden sich Trennscheiben mit Cubitron II Hochleistungsschleifkorn sowie Arbeitsschutzprodukte im praktischem Koffer. Inhalt: 1x 3M Trennschleifer 100 mm, 20.000 U/min, 0,7 PS 33579, 20x 3M Trennscheiben 100 mm, 10 mm Loch, 1 mm Dicke, 20x 3M Trennscheiben 75 mm, 10 mm Loch, 1 mm Dicke, 1x 3M Peltor Kapselgehörschutz X4A, grün, SNR 33 dB, 1x 3M SecureFit 400 Schutzbrille, klar,1x 3M Etui, 1x Koffer für die Aufbewahrung
Find the balance between dust extraction and sanding performance with the 3M Xtract mesh sanding disc 310W. This Advanced Series sanding disc has a mesh backing that enables virtually dust-free sanding. This technology enables you to increase productivity without jeopardising the health of your employees.
High cutting performance. Attractive price. 3M has redefined sanding and eliminated the trade-off between dust extraction and disc performance with a range of mesh abrasives. The Advanced Series abrasives are designed to offer an unbeatable combination of performance and value for a better price/performance ratio. Driven by innovative 3M technologies and technical expertise, the 3M Xtract™ Mesh Abrasive Disc 310W helps you stay competitive in your industry. Enables a safer working environment. A clean working environment is a safer working environment. The 3M Xtract Grid Sanding Disc 310W enables the extraction of more than 95% of the dust generated during sanding, reducing exposure to airborne particles and creating a healthier, virtually dust-free work environment. In addition, the abrasive grain in the disc cuts through the user with less pressure, making sanding more comfortable. Experience the benefits of the 3M Xtract system. 3M™ is your system provider for all needs. From mesh sanding discs to random orbital sanders to portable dust extractors, we offer everything you need to increase productivity and quality in your operation. 3M™ technical experts have decades of application and industry knowledge to ensure you get the right abrasive and the optimal system solution. Applications - Metalworking - Primer sanding - Gelcoat sanding - Composite sanding - Woodworking.
Variants from €0.20*
€0.37*
Data protection notice
The video will be loaded after your confirmation via the video portal YouTube. By confirming, you agree to load the videos on this page from the external provider YouTube in compliance with the GDPR.