3M Screen printing ink 884i, yellow, 3.78 l

Adhesive tape for covering during chrome plating as protection against budding and as radiation protection and for labelling in X-ray technology.

The S-K-S 196 is a PE-coated fabric adhesive tape with a very high initial adhesion. The adhesive tape is highly tear-resistant. SKS 196 has a matt surface to avoid light reflection. It is waterproof, adheres very well to rough and uneven surfaces and is easy to tear off by hand.

The 3M 4515 protective suit is characterised by its special layer structure: Two thin layers of soft spunbond fleece are embedded in the thick polypropylene filter layers. This makes the protective suit particularly permeable to water vapour, which has a positive effect on wearer comfort and the duration of wear. It offers protection against hazardous dusts (type 5), light liquid splashes (type 6) and radioactive, contaminated particles (EN 1073-2:2002). Elasticated inserts at the hips, ankles and wrists ensure a comfortable fit and improved freedom of movement. The two-way zip with detachable flap offers additional protection. Its SMS material is low-linting. The 3M 4515WXL / TYPE 5/6 protective suit is suitable for use in asbestos inspection, insulation work, asbestos disposal, storage work, light cleaning work, cement production, grinding and polishing, light industrial cleaning and machine maintenance. The protective suit is available in four different colours - model 4515WXL is white and size XL.

Filter cover for use with the TR-6110E and TR-6130E filters. 3M recommends the use of the filter cover to protect the TR-6110E from material damage. It is also used as a holder for the TR-6600 pre-filter or the TR-662 spark arrester. The TR-6100FC should be replaced if damaged. The filter cover can be cleaned and reused.

The TR819E starter kit for the 3M Versaflo TR-800 / TR802E intrinsically safe blower system is the practical, ready-to-use kit for working under difficult conditions in potentially explosive atmospheres. The TR819E starter kit is equipped with a complete intrinsically safe blower system and offers convenience, modularity, control and ease of use. The TR-800 fulfils the requirements for Zone 0 and can be used in potentially explosive atmospheres. It is also suitable for continuous use under normal operating conditions. The starter pack contains an intrinsically safe blower (TR-802E), an intrinsically safe battery with a battery life of up to 7.5 hours (TR-830), a battery fixing tool (TR-838), an airflow indicator (TR-971), an easy-clean belt (TR-627), an airflow indicator (TR-971), an airflow indicator (TR-971), an easy-clean belt (TR-627), an easy-clean belt (TR-627), an easy-clean belt (TR-627) and an easy-clean belt (TR-627).(TR-627), a length-adjustable air hose (BT-30), an A2P filter (TR-6310E), a filter cover (TR-6300FC), pre-filters (TR-6600) and a battery charger (TR-641E). TR-800 is approved for use with a wide range of 3M (Versaflo S-series lightweight bonnets and M-series headpieces. Choose the one that best suits your application! A head piece is not included in the set. It has ATEX certification and CE marking. Set: 3M TR-819E IS Versaflo starter pack Ex protection- 1x blower unit TR-802E - 1x A2P filter TR-6310E - 1x filter cover TR-6100FC - 10x pre-filter TR-6600- 2x spark arresters TR-662 - 1x Standard belt T-627 - 1x battery TR-830 - 1x Tool for attaching the battery TR-838 - 1x charger TR-640 - 1x BT-30 length-adjustable air hose - 1x Airflow indicator TR-971   - 1x 3M Versaflo safety helmet M206 with comfort face seal and polycarbonate visor, clear

tesafix 4963 consists of a transparent PVC film carrier with a rubber adhesive and is covered with a creped, silicone-free PVC film.