3M SecureFit safety helmet, X5502NVE-CE, yellow, non-ventilated, CE

Variants

Ventilated
Reset selection
€60.06* % €0.00* (0.00% saved)
Unit price: €60.06* % €0.00*
Unit price (net): €50.47 % €0.00
Delivery time 2-5 days working days

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.
Product information "3M SecureFit safety helmet, X5502NVE-CE, yellow, non-ventilated, CE"

The 3M SecureFit safety helmet X5502NVE-CE provides you with safe and comfortable head protection. The safety helmet was designed for general industrial use and everyday safety requirements. Inspired by modern climbing helmets, it offers protection against small falling objects. It has adjustable positioning on the head. Our 4-point ratchet closure system allows the headband to be adjusted quickly and comfortably as required. The exclusive, patented 3M pressure distribution technology is integrated into the helmet. It not only ensures a secure fit, but also improves wearing comfort. This technology reduces the force on the head by up to 20% compared to conventional 3M helmet straps. The rimless design allows an unobstructed view upwards. This makes it easier to see and avoid potential hazards in the surrounding area. This yellow safety helmet is equipped with a patented 3M UVicator sensor, which changes colour from red to white when exposed to harmful UV radiation. Exposure to UV radiation can cause the helmet shell to become brittle, limiting effective protection. The colour change of the sensor indicates when the helmet should be replaced. The existing notches and holders for accessories are compatible with a wide range of 3M protective visors, earmuffs and other accessories. Chin straps with plastic fasteners can also be attached to the helmet. Tested for lateral deformation and liquid metal splashes and fulfils the EN 397 standard for industrial safety helmets.

Properties
  • Colour: Yellow
  • Taping system with exclusive, patented 3M pressure distribution technology
  • Customisable position
  • Compatible with chin strap with plastic fastener
  • Patented UV indicator lets the wearer know when the helmet has been exposed to excessive UV and should be replaced
  • Certified to EN 397 as an industrial safety helmet
  • UV-stabilised ABS
Advantages
  • The 4-point ratchet fastening system allows the wearer to adjust the helmet height and fit with several vertical adjustment options.
  • The climbing helmet orientated rimless design allows an unobstructed view upwards
  • Existing notches and mounts are compatible with a variety of 3M visors, earmuffs and other accessories
  • Tested for lateral deformation and liquid metal splashes
  • Electrical insulation for voltages of 1000 VAC and 440 VAC
Product benefits
  • Safe, comfortable head protection against small falling objects and for general industrial use
Field of application
  • For use in construction, forestry, the oil and gas industry, utilities and waste disposal companies and in general industry

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Article no: 84309
Part number: X5502NVE-CE-4
SAP number: 7100175600
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
Enquiry form

Recently viewed products

Tesa 4591 19mmx50m colourless
tesa 4591 is a bidirectional filament adhesive tape. It consists of a polyester film coated with glass fibres and a synthetic rubber adhesive system. tesa 4591 is characterised by its high tensile strength and strong adhesion to various surfaces. The adhesive tape is resistant to minor damage (e.g. cuts) and offers strong tear resistance. Thanks to its backing material, it offers excellent longitudinal and transverse stability as well as strong tear resistance.

Contents: 50 meter (€0.07* / 1 meter)

€3.58*
3M 261X Lapping Film, 9 micron, roll 50.8 mm x 45.7 m, ASO 3" core Keyed Core
3M 261X on a 3 mil film backing with aluminium oxide grain is available in grain sizes 0.3 - 3 - 5 - 9 - 12 - 30 microns. The products are available in either ASO or ASI versions. ASO=Abrasives Side Out, i.e. the grain side is wound outwards, ASI=Abrasives Side In, i.e. the grain side is wound inwards. The inner diameter of the core is 76.2 mm and has 4 driving grooves.

Contents: 45.7 meter (€1.53* / 1 meter)

€69.77*
Tyrolit Wheel brushes DxWxLxH 125x12x25x22.2 For steel, shape: 1RDZ - (wheel brush), Art. 34276002
The BASIC round brushes are very well suited for weld seam processing. Depending on the type of wire, TYROLIT provides you with the right brush for your application. You can use knotted brushes for surface preparation and for removing rust, scale and concrete residues.

€8.56*
Tyrolit Tile drilling wet DxTxY/AUFN 5x35xHEX DDT, mould: HOHLT, Art. 34180136
TYROLIT vacuum-brazed diamond core bit for all ceramic tiles, porcelain stoneware and marble slabs. Maximum drilling comfort, universally applicable. Perfect, chipping-free drilling in tile and sanitary areas.

€13.16*
3M ET 11 Acetate fabric tape, black, 9 mm x 66 m, 0.18 mm
The 3M acetate fabric tape 11 is particularly suitable for covering spools. It is also very suitable for absorbing resins and paints. Thanks to its high elasticity, it adapts very well to moulded substrates and its heat-treated rubber adhesive also adheres excellently to textured or uneven surfaces. At the same time, the smooth, silky carrier surface made of black acetate fabric enables bonding that meets high aesthetic standards. It can also be printed on for labelling purposes. The fabric tape can withstand a breakdown voltage of 2,000 volts and is resistant to temperatures of up to 105 °C, making it class A insulating material. It can be easily cut by hand, making it pleasant and easy to handle.

Contents: 66 meter (€0.22* / 1 meter)

Variants from €10.76*
€14.67*
TYROLIT CERABOND X Fibre discs CA-P94 DxH 115x22 For steel and stainless steel, P24, shape: DISC V, Art. 34486168
The new fibre discs from TYROLIT guarantee maximum aggressiveness, an unassailable service life and maximum comfort when machining steel and stainless steel. This is made possible by the self-sharpening ceramic grain in combination with an innovative bond. The combination of blue-fired ceramic grit and our unique bond system guarantees lasting aggressiveness and an unimpeachable service life. The CERABOND X fibre disc is the best choice for fast and comfortable work on steel and stainless steel. With Cerabond X you can reach your goal faster - both when surface grinding and when removing weld seams as well as when derusting or deburring.

€1.26*
Average product rating
4.93/5
Store reviews
Score is calculated from 1232 reviews from the last 12 months out of a total of 3198 reviews.
09.04.2024
.