3M single-handed pneumatic random orbit sander Elite series, 76 mm, external dust extraction, 2.5 mm sanding stroke

special compact disc for achieving decorative, coarse surfaces with a striking line pattern, especially on softer metals such as copper or aluminium.

The 3M Xtract pneumatic random orbit sander is a key component of the 3M Xtract sanding system. Together with 3M Xtract mesh discs and the portable 3M Xtract dust extraction unit, this powerful 0.28 HP (209 W) sander enables virtually dust-free sanding.   Robust construction for industrial use. 3M Xtract Air Random Orbital Sanders are equipped with powerful, precision-balanced air motors and durable, lightweight aluminium housings. These high-quality components withstand the long processing times in the workshop. Leave the dust behind. If you want a clean working environment and more efficient sanding, the 3M Xtract pneumatic random orbital sander is for you. Designed for dust extraction as part of the 3M Xtract sanding solution, these sanders connect easily to our 3M Xtract portable dust extraction unit, 3M machine sanding filter bags or your existing centralised dust extraction system. The rear threaded attachment allows for easy and safe attachment and removal of a 1" male threaded hose (sold separately) to effectively remove dust from the workpiece and surrounding area. In combination with 3M Xtract Net Discs and a dust extraction system, the system extracts up to 97 % of the dust generated during sanding. Experience the benefits of 3M Xtract random orbital sanding solutions. 3M is your system provider for all sanding needs. From mesh discs to random orbital sanders to portable dust collection units, we have everything you need to increase productivity and part quality in your shop. 3M's technical experts have decades of application and industry knowledge to ensure you get the right abrasive and the optimal system solution. Applications in focus Metal working and processing Sanding of filler Sanding of gelcoat Sanding of composite materials Woodworking Sanding stroke of 2.5 mm Chrome-plated lever Fine sanding When should you choose a sanding stroke of 2.5 mm? - For the use of fine grits - For the lowest material removal   Sanding stroke of 5 mm Silver lever General sanding work When should you choose a sanding stroke of 5 mm? - The most commonly used sanding stroke - Good ratio of material removal and finish   Sanding stroke of 8 mm Black lever Aggressive sanding When should you choose a sanding stroke of 8 mm? - When more material removal is required than with a sanding stroke of 5 mm - If the sanding should not be as aggressive as with a sanding stroke of 10 mm   Sanding stroke of 10 mm Golden lever Maximum aggressive sanding When should you choose a sanding stroke of 10 mm? - For maximum aggressive material removal - For sanding large surfaces or when a high removal rate is required

The range of pressed compact discs extends from an aggressive and rigid deburring tool to a soft tool for a perfect surface finish. They are particularly suitable for hard-to-reach areas and do not change the surface geometry of the workpiece in any way when used. The main areas of application are deburring, cleaning, blending, finishing and the processing of weld seams. Compact discs offer increased safety compared to other deburring tools and a particularly cool finish.

Deburring of shaft and piston rods before hard chrome plating; deburring of turbine blades, stamped flat parts, thread guides and machine parts, gear wheels, die-cast and injection-moulded parts, automotive parts (e.g. piston rings, pistons), parting lines on cast and pressed parts; Attention: The direction of rotation must be observed!

3M VHB high-performance adhesive tapes are double-sided adhesive tapes made of closed-cell acrylate adhesive. They offer good adaptability to the surfaces to be bonded. Smooth or structured surfaces can be bonded over the entire surface without tension. Ideally suited for a variety of materials with high surface energy, such as metals (steel, aluminium, etc.).

Newly developed for your requirements. Introducing the next step in surface finishing technologies: Scotch-Brite precision non-woven discs. This new addition to the Scotch-Brite range promises the consistency you have come to expect, with faster stock removal and longer abrasive life. By combining two outstanding 3M technologies - fleece and the 3M precision-moulded ceramic grain - you can now achieve an ideal finish even faster. To help you work even more efficiently, these discs are available in brighter, more vibrant colours to make them easier to distinguish. In addition, the range of grits has been extended to include fine and extra coarse versions, giving you an even wider choice of solutions for your abrasive needs.   Improve your work processes. These high quality general purpose abrasive discs are designed to optimise the steps involved in surface finishing, including cleaning, blending, deburring and finishing. Typical substrates include aluminium and soft metals, carbon steel and stainless steel. Applications range from the removal of coatings and corrosion to the finishing and post-processing of castings.