3M Spacer film 7997MP, transparent, 610 mm x 0.914 m, 0.175 mm, 100 sheets/carton

Variants

Breite in mm

Dicke in mm

Länge in m

Reset selection

€1,213.84* % €0.00* (0.00% saved)

Unit price: €1,213.84* % €0.00*

Unit price (net): €1,020.03 % €0.00

Contents: 0.914 meter (€1,328.05* / 1 meter)

Delivery time 2-5 days working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M Spacer film 7997MP, transparent, 610 mm x 0.914 m, 0.175 mm, 100 sheets/carton"

The spacer films in the 3M 200MP adhesive series are designed in particular for the manufacture of membrane keypads and front panels, for snap-on disc positioning or as self-adhesive circuit films. The series is shear-resistant (even with narrow webs) and chemically compatible with various conductive pastes and special colours. The spacer films, which are temperature-resistant from -40°C and up to +120°C (up to +150°C for short periods), are characterised by very high transparency and UV light resistance and are permanently elastic and resistant to ageing. The spacer films do not bleed at the punched edges.

Properties

175 µm thick, single-sided adhesive spacer film with 200MP adhesive. 125 µm thick, transparent polyester backing. 180 µm thick, PE-coated protective paper.
The transparent polyester backing brightens the overlay and the pushbuttons, making surface illumination unnecessary. Easy to die-cut and process. Smooth appearance for front foils. Suitable for die-cutting and processing by means of
Excellent resistance to moisture and solvents. Excellent temperature resistance and shear strength. UV resistant. Easy to apply. Does not create dirt. Easy to die-cut. Suitable for punching.
For protecting cables, fixing switch caps or making your own spacers

Advantages

Excellent resistance to moisture and solvents. Excellent temperature resistance and shear strength. UV resistant. Easy to apply - non-staining

Questions about the article?

As we make up our own adhesive tapes (cut to size), there may be a tolerance of 1-2 mm on the first roll.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 77770

Part number: 7997B610

SAP number: 7100040289

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Downloads

Download data sheet as PDF

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

S-K-S pressure roller with rubber roller diameter=30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

Recently viewed products

Tyrolit CA-P93 PE Y hinges TxH 75x2000 For steel and stainless steel, P40, mould: BELT, Art. 34168480

Belts with self-sharpening ceramic grit offer a high removal rate on steel and stainless steel. This self-sharpening effect over the entire service life of the abrasive belts results in a uniform surface finish. The nature of the abrasive belt also reduces the workload for the user, as less pressure is required.

Contents: 2 meter (€6.70* / 1 meter)

€13.40*

TYROLIT grinding wheels DxDxH 60x10x10 1F80 for steel, shape: 1F80 - straight version (rough grinding wheel), Art. 441219

The PREMIUM 1F80 high-performance grinding disc is particularly suitable for universal grinding tasks in hard-to-reach areas. This disc can be used to create grooves and notches and to deburr gears. Furthermore, the maintenance of turbine blades, the roughing of curved surfaces in cavities and ribbing are also no problem. For diameters over 80 mm, we recommend the use of a protective cover.

€6.13*

3M Scotchcast 280 Epoxy liquid resin, yellowish transparent, (A+B) 5.44 kg

3M Scotchcast Casting Resin 280 is a yellowish-transparent two-component system consisting of epoxy resin and hardener. It is a thermosetting multi-purpose resin with low viscosity that remains medium-flexible after curing. It is self-extinguishing and with a temperature resistance of up to 155 °C, it belongs to insulating material class F. The unfilled casting resin is extremely resistant to ageing and moisture and has excellent physical and electrical stability. Thanks to its good flow properties, it completely encloses even the smallest coils. Casting resin 280 is therefore ideal for impregnating coils and transformers by both impregnation and moulding. It can also be used for embedding electronic modules or transformers etc. and for filling cavities, for example in winding heads.

Contents: 5.44 kilogram (€162.22* / 1 kilogram)

Variants from €80.16*

€882.50*

Tyrolit A-B02 PC X Pins DxD 80x30 For steel, stainless steel and non-ferrous metals, P80, shape: 52LA, Art. 34054861

Thanks to their flexibility, the BASIC flap points adapt well to any workpiece contour. The radially arranged flaps of the flap points can be used on different materials and allow precise work in various applications such as matting, pre-polishing and cleaning surfaces. The highly flexible flaps also make it easy to work on hard-to-reach areas.

€4.76*

Tyrolit Cup brushes DxLxGE 100x30xM14 For steel, shape: 11TDW - (cup brush) , Art. 34275961

Brushes are universally applicable tools. Cup brushes in particular are among the most commonly used tool brushes. Depending on the type of wire, TYROLIT can supply you with the right brush for your application. You can use knotted brushes for surface preparation and for removing rust, scale and concrete residue. Brushes with crimped wire can also be used to remove rust and paint, as well as for fine finishing. Our products are also frequently used for cleaning welding seams.

€13.54*

Tyrolit CNC tool grinding with metal-bonded CBN for wet grinding DxDxH 75x10x20 For high-alloy steels and HSS, shape: 1V1, Art. 772453

This metal-bonded CBN disc grinds all cutting tools for the wood and metal industry. Grinding disc sets for complete machining are available in the CBN grit size range B126 - B76. Important: It should only be used for deep grinding. A perfect balance of grit size, concentration and bond delivers extremely long tool life and profile accuracy.

€480.87*