3M Stikit Self-adhesive microfinishing film disc 268L, 32.0 mm, 9 microns, 100 pieces / roll

The carrier film of this adhesive tape gives foams and other materials increased dimensional stability and also makes the tape easier to handle when cutting and punching.  With a very high initial tack, the adhesive strength of the 3M 300LSE adhesive increases even further depending on time and temperature. 120 µm thick, transparent polyester backing with a 95 µm thick 300LSE series adhesive layer on each side. 110 µm thick, PE-coated, light brown protective paper.

The 3M Adflo blower unit is respiratory protective equipment which, in combination with an approved headpiece, provides the user with a high level of protection and comfort during welding and related activities. The blower unit has a particle filter, a spark arrester, a pre-filter and a 5-stage filter saturation indicator that shows the user the status of the particle filter. Optional gas filters offer additional protection against common gases and vapours that can occur during welding. Furthermore, an optional odour protection filter can be used to protect the user from unpleasant odours. The blower unit has an automatic air flow control which ensures that the air flow to the head section is always constant. Integrated electronics permanently monitor the battery power and the air flow and immediately trigger a visual and audible alarm if the level falls below set limits. There is a choice of two Li-ion batteries, a standard and a high-performance battery. The unit also has an altitude calibration function that automatically adjusts the function of the device to the respective altitude above sea level. The Adflo blower respiratory protection system draws in the polluted ambient air, passes it through the respective filters and then directs the purified air into the head section via an air hose. For details on the protection levels and possible restrictions on use, please refer to the operating instructions for the head pieces used. Set: 3M Adflo starter pack - 1x Adflo blower respirator 837730 - 1x Air hose QRS 834016 - 1x Adapter QRS 533506 - 1x Air flow meter 838020 - 1x Pre-filter 836010 - 1x spark arrester 836000 - 1x Particle filter 837010 - 1x Li-lon standard battery approx. 8 hours 837630 - 1x Belt 835000 - 1x Charger 833111   - 1x 3M Versaflo disposable lightweight bonnet S133S, with integrated head holder, white, universal textile material, size S/M - Material: Web 24

SDS-Plus Bohrhammer mit 4-Blatt-Bohrer und hochwertigem Spezialstahl im Kern. Der Bohrer durchtrennt die Armierung ohne seitlich wegzurutschen. Geeignet für Beton mit oder ohne Armierung, Naturstein, Ziegel und ähnliche Materialien. Die Bohrer sind in vielen verschiedenen Längen und Durchmessern erhältlich.

The 3M Scotchflex cable ties black, UV-resistant are made of polyamide 6/6, a tear-resistant nylon. Thanks to the grid fastening principle, you can easily set any desired capacity. This makes the UL E97527-certified cable ties ideal for bundling multiple cables. Cable ties with grid closure for bundling multiple cables.

Deburring, matting and finishing of all stainless steel and steel components, removal of annealing colours, application of a defined finish even on large surfaces, reduction of roughness depth, various applications also on wood and plastics

Newly developed for your requirements. Introducing the next step in surface finishing technologies: Scotch-Brite precision non-woven discs. This new addition to the Scotch-Brite range promises the consistency you have come to expect, with faster stock removal and longer abrasive life. By combining two outstanding 3M technologies - fleece and the 3M precision-moulded ceramic grain - you can now achieve an ideal finish even faster. To help you work even more efficiently, these discs are available in brighter, more vibrant colours to make them easier to distinguish. In addition, the grit range has been extended to include Fine and Extra Coarse versions, giving you an even wider choice of solutions for your abrasive needs.   Improve your work processes. These high quality general purpose abrasive discs have been developed to optimise the steps involved in surface finishing, including cleaning, blending, deburring and finishing. Typical substrates include aluminium and soft metals, carbon steel and stainless steel. Applications range from the removal of coatings and corrosion to the finishing and post-processing of castings.