The 3M TC2707 Thermally Conductive Adhesive is a two-component epoxy adhesive filled with boron nitride (BN). It has good thermal conductivity and good adhesion to many surfaces, both smooth and rough. With the practical double cartridge and suitable mixing nozzles, the ideal mixing ratio is achieved. The adhesive can be applied directly from the cartridge using the applicator.
- Minimal outgassing and optimum adhesion
- High adhesive strength
- Good surface wetting
- Ultra-thin adhesive line
- Gap-filling
- Low thermal impedance
- Good thermal conductivity (0.72 W/m-K)
- Low initial adhesion enables pre-assembly
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
P260A Do not breathe vapour.
P280D Wear protective gloves, protective clothing and eye/face protection.
P303 + P361 + P353A IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.
Log in