Product information "3M Thermally Conductive Adhesive Film 8926-05 15 mm x 40 m, 0.500 mm"
3M 8926-05 Thermally Conductive Adhesive Film is a 0.50 mm thick adhesive tape which, with its thin PET carrier material, is characterised by good punchability, processability and easy handling. The thermally conductive products in the 3M 8926 series are based on a soft acrylic polymer, are available in different thicknesses and can be applied excellently to different surfaces. Possible replacement for 3M 8940.
Properties
Good thermal conductivity (>1.5 W/m-K)
Excellent dielectric behaviour
High adhesion to a wide range of materials
Excellent dielectric strength
Advantages
Low thermal resistance
Good and reliable adhesion to aluminium and stainless steel
Share your experience with the product with other customers.
Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.
Log in
No reviews found. Go ahead and share your findings with others.
Article no:
36793
SAP number:
36793
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.
Breite in mm:
158 mm
|
Farbe:
Red
|
Körnung:
Very fine
|
Länge in m:
0,224 m
Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.
The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.
For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.
S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use
The 3M Aura respirator 9330+ folding mask allows you to breathe almost effortlessly and is extremely comfortable to wear. It owes its comfort plus in particular to the three-part design with the newly developed filter fleece. The advantages of the particle mask start with good visibility: the sealing points on the top of the mask reduce the fogging of glasses. The new filter technology ensures comfortable breathing. It combines the advantages of 3M Electret filter technology with those of the new advanced technology for barely perceptible breathing resistance with reliable filter performance. The average inhalation resistance of 63% is significantly lower than the maximum permissible value of EN 149:2001+A1:2009. Two further advantages of the mask lie in its three-part design: on the one hand, it leads to greater comfort and problem-free speaking, and on the other hand, the mask can be folded flat and is therefore practical to take with you. The special design of the nose area is also ideal, as it adapts perfectly to the shape of the wearer's face. The chin strap makes it easy to position the mask, ensuring a good fit and a secure seal. The 3M Aura respirator 9330+ is hygienically individually packaged and has protection level FFP3 NR D. The application limit is 30 times the limit value for particles. They are used in the construction industry, in agriculture, in quarries, in the clay and ceramics industry, in iron and steel foundries, in the chemical industry, in metalworking and processing, in the pharmaceutical industry and in construction. Approval according to standard EN 149:2001+A1:2009.
The 3M double-sided adhesive tape with paper fleece backing 9086 is a universal adhesive tape that adheres to many different materials. These include substrates made of metal, plastic, paper, cardboard, wood and painted surfaces. Possible areas of application include the self-adhesive fitting of furniture mouldings, cable ducts or sealing profiles as well as the mounting, assembling and fixing of advertising materials such as displays, samples or posters. The adhesive tape has a very high initial tack and shear strength and is also characterised by good plasticiser and UV resistance. Its colour-coded protective paper makes it easy to identify the adhesive tape. The protective cover is made of white paper with a black 3M logo. Colour of the adhesive tape: white.
The double-sided adhesive tape 3M 9527 with paper fleece backing is characterised by its very high instant adhesion and good adhesion to low-energy materials (e.g. PP, PE). It is 0.13 mm thick and temperature resistant up to +50°C (+70°C for short periods).
TYROLIT fleece pins are highly adaptable and ensure that there is no change to the surface finish. The TYROLIT Premium range is now being extended by 29 types to provide you with a choice of different grit sizes and other dimensions. The large number of grit gradations means that different surface structures and roughnesses can be achieved. TYROLIT fleece points are also available with an inserted abrasive cloth to achieve higher material removal and a coarser surface finish.
Double-sided PE foam adhesive tape consisting of a closed-cell polyethylene foam with acrylate adhesive. It is ideal for permanently fixing or mounting interior and exterior components such as holders, hooks, signs, mirrors, frames, mouldings, emblems, panelling, displays, decorative parts, etc.
Contents:
66 meter
(€28.33* / 1 meter)
Variants from €8.82*
€1,869.91*
Data protection notice
The video will be loaded after your confirmation via the video portal YouTube. By confirming, you agree to load the videos on this page from the external provider YouTube in compliance with the GDPR.