3M Trizact structured film disk 568XA 127mmx12,7m (roll of 100 disks) #94149

Support frame for attaching the 3M Versaflo visor frame M-967 to 3M Versaflo M-series helmets

The 3M Aura respirator 9330+ folding mask allows you to breathe almost effortlessly and is extremely comfortable to wear. It owes its comfort plus in particular to the three-part design with the newly developed filter fleece. The advantages of the particle mask start with good visibility: the sealing points on the top of the mask reduce the fogging of glasses. The new filter technology ensures comfortable breathing. It combines the advantages of 3M Electret filter technology with those of the new advanced technology for barely perceptible breathing resistance with reliable filter performance. The average inhalation resistance of 63% is significantly lower than the maximum permissible value of EN 149:2001+A1:2009. Two further advantages of the mask lie in its three-part design: on the one hand, it leads to greater comfort and problem-free speaking, and on the other hand, the mask can be folded flat and is therefore practical to take with you. The special design of the nose area is also ideal, as it adapts perfectly to the shape of the wearer's face. The chin strap makes it easy to position the mask, ensuring a good fit and a secure seal. The 3M Aura respirator 9330+ is hygienically individually packaged and has protection level FFP3 NR D. The application limit is 30 times the limit value for particles. They are used in the construction industry, in agriculture, in quarries, in the clay and ceramics industry, in iron and steel foundries, in the chemical industry, in metalworking and processing, in the pharmaceutical industry and in construction. Approval according to standard EN 149:2001+A1:2009.

The range of pressed compact discs extends from an aggressive and rigid deburring tool to a soft tool for a perfect surface finish. They are particularly suitable for hard-to-reach areas and do not change the surface geometry of the workpiece in any way when used. The main areas of application are deburring, cleaning, blending, finishing and the processing of weld seams. Compact discs offer increased safety compared to other deburring tools and a particularly cool finish.

The 3M abrasive paper 314 is suitable for wet sanding of all paint and filler materials with a sanding block or soft hand block. Together with the high-performance aluminium oxide grain, the stable backing of the waterproof abrasive ensures a high removal rate and thus enables efficient work with excellent end results. The abrasive is therefore particularly suitable for coarse and intermediate sanding and is available in grit sizes P60 to P1200.

Textile entrance flooring for medium footfall of up to 1500 people/day. Due to the composition of coarse and fine fibres, high dirt and moisture absorption can be guaranteed and entry into the building prevented. The material dries out again quickly thanks to optimum moisture distribution. Material height 7.5 mm. Fire behaviour according to EN 13501-1: Efl-s1. Slip resistance according to DIN 51130: R12.

3M Acrylic Plus adhesive tape made from a black acrylic foam  for use on automotive surfaces that are difficult to bond (e.g. powder coatings, clear coats containing nanoparticles, PP, EPDM, etc.). The adhesive tape is suitable for attaching plastic add-on parts such as stone guard strips, bumper protection strips and wheel arch extensions. EX4008 is characterised by very good adhesion to modern, difficult-to-bond automotive surfaces, both for various paint systems and primerless for low-energy plastic surfaces. The foam core guarantees good wetting and adaptation to the surface geometry. In addition, the EX4008 adhesive tape is characterised by good internal strength and good long-term stability. The foam core guarantees good wetting and adaptation to the surface geometry.