3M VHB adhesive tape 4912F, white, 19 mm x 16.5 m, 2 mm

Scotch 8581 is a polyurethane adhesive tape flocked with black polyester fibres and covered with an adhesive-repellent protective paper. The excellent anchorage of the flocks and the high abrasion resistance of the flock material and polyurethane backing ensure a long service life even under the most difficult conditions

The cutter knife consists of a metal housing. The knife handle is ergonomically shaped and sits securely in the hand thanks to its non-slip surface.

The PREMIUM LONGLIFE flap disc offers maximum service life and excellent stock removal. This flap disc is used on high-alloy steels and stainless steel as well as on unalloyed and low-alloy steels. Problem-free weld seam processing as well as edge and surface grinding, especially when used on powerful angle grinders.

The 3M maintenance-free half mask 4251+ offers you effective respiratory protection as a user-friendly complete mask. The new, improved exhalation valve reduces breathing resistance during exhalation, reduces heat and moisture build-up and thus makes breathing easier, especially in hot and humid working environments. Our 4000+ series half masks have a soft, skin-friendly, silicone-free face seal. The FFA1P2 R D filter class protects against many of the common organic gases, vapours and particles in industrial environments. The lightweight, well-balanced design with integrated, maintenance-free filter elements ensures good peripheral vision. The integrated filter elements are maintenance-free. You can use the half mask until it is time to change it according to the filter change schedule or until the filter elements are saturated. Then dispose of them properly. The comfortable harness with adjustable head strap offers a secure fit and adapts to different head shapes and sizes. The flat design does not restrict your field of vision and the two large-area activated carbon filters ensure low breathing resistance. The FFA1P2 R D filter class protects against organic gases and vapours up to 30 times the limit value (boiling point above 65 degrees Celsius) and particles up to 10 times the limit value. A resealable bag for hygienic storage and transport is included in the scope of delivery. *The exhalation resistance of the 3M™ 4000+ half mask series has been reduced by >30% at 120 l/min and >35% at 160 l/min compared to the previous 3M™ 4000 series. The results were measured by 3M in 2017 under laboratory conditions. The breathing rates are only an example.

This brake calliper brush was developed together with the automotive industry in order to thoroughly remove brake wear. The two-component handle makes this brush even easier to handle for the user. This brush was developed primarily for working on steel. Despite its narrow bristles, it is extremely powerful when cleaning. At the same time, however, brake sleeves remain undamaged during processing.

Build the right brush for your individual needs. With the radial single segments, you get the proven Scotch-Brite Bristle technology of the Cubitron ceramic abrasive grain encapsulated in solid plastic and achieve consistent work results over the entire service life. With their curved bristles (type C), the RB-ZB single segments belong to the most flexible Scotch-Brite Bristle variant. They are ideal for cleaning and light deburring applications in hard-to-reach work areas, especially as they are also available in smaller diameters. With the MN-AC mandrel, the individual segments are combined (1 segment=approx. 1.6 mm wide).

3M 6008J is a flexible diamond abrasive tool with a flexible polyester cloth backing and self-adhesive backing (PSA). In combination with the corresponding backing pads, it can be used on a wide range of hand-held machines. For the highest demands on surface quality, combined with high cutting performance and an exceptional finish.

These carbide end mills have been specially developed for use on stainless steel and manufactured on state-of-the-art CNC grinding machines. The newly developed geometry enables cool grinding with maximum tool life on hand-held, pneumatic and electric machines. The aggressive cutter shape is particularly long-chipping and thus ensures a large stock removal rate. Reduced heat generation protects the milling cutter and the workpiece.