3M Versaflo TR-655 Backpack adapter for TR-600 & TR-800 for attachment to back carrying plate BPK-01 and BPK-02

The BPK-02 back support plate is an accessory product for the 3M Versaflo blower unit TR-300, TR600, TR800, Adflo and for the 3M Jupiter blower unit. It enables the blower units to be carried comfortably. Important for TR-600 & TR800 you still need the adapter TR-655

A particle filter for use with the 3M Versaflo TR-600 blower unit. The filter is attached directly to the unit. 3M recommends the use of the TR-6700FC filter cover to protect the filter from material damage. The TR-6700FC filter cover is also used as a holder for the TR-6600 pre-filter or the TR-662 spark arrester.

Folding rule 2 m in white  with a two-colour scale (black/red). There is an angle measuring function at both ends.

The S-757 premium reusable lightweight bonnet is a head piece for the 3M Versaflo respiratory protection system. It covers the head, face, neck and shoulders and offers eye and face protection in accordance with EN166 (protection against liquid splashes and flying particles with low impact energy). The premium reusable lightweight bonnet is characterised by its special material, which absorbs paint mist and thus reduces the risk of the paint beading off the wearer and falling onto the workpiece. The textile material is also coated on the inside to prevent paint from getting onto skin or clothing. The lightweight bonnet has a double neck seal design. The inner part of the neck seal is tucked into the top of the shirt or protective suit. This allows excess air to be channelled over the entire body, providing additional comfort. The lightweight bonnet is an extremely cost-effective solution for environments with high disposal rates: When worn, only the contaminated outer bonnet is replaced, while the headgear and air supply can continue to be used. The rigid design of the headband ensures a uniform air supply. Another plus is that it can be adjusted from the outside so that the wearer can regulate the air distribution to suit their personal comfort requirements. A simple turn of the outer knob is all it takes for the wearer to direct the airflow away from the back of the head and towards the temples, face and visor. The bracket has separate adjustment options for head height and head circumference, allowing comfortable, customised adjustment to a wide range of head shapes. The soft comfort pad can be used to further improve the fit so that the bonnet fits even more wearers perfectly. The S-757 premium reusable lightweight bonnet is available as a starter pack including head support and inner bib. Colour: white. Protection level: TH3.

The TR-927 back support plate is an accessory for the 3M Versaflo blower unit TR-300, TR600, TR800, Adflo and for the 3M Jupiter blower unit. It enables the blower units to be carried comfortably. Important for TR-600 & TR-800 you still need the adapter TR-655. 3M is pleased to introduce an extension of the 3M Versaflo respiratory protection accessories: the 3M Versaflo Easy Clean back carrying plate. It has a smooth surface and can be disassembled for easy cleaning. It is also designed for comfort and is easy to put on and take off. The shoulder straps can be easily adjusted in length. This makes the back carrier plate suitable for a wide range of users.   The Easy Clean back support plate ensures that the TR-300+, TR-600 and TR-800 blower respiratory protection systems are held securely on the back.   When used together with the TR-300+ blower respiratory protection system, the back support plate fulfils protection class IP53; when used with the TR-600 and TR-800 blower respiratory protection systems, it fulfils protection class IP54.

Filter cover for use with the TR-6710E filter. 3M recommends the use of the filter cover to protect the TR-6710E from material damage. It is also used as a holder for the TR-6600 pre-filter or the TR-662 spark arrester. The TR-6700FC should be replaced if damaged. The filter cover can be cleaned and reused.