3M polyester masking tape 8902, blue, 19 mm x 66 m

Variants

Breite in mm

Dicke in mm

Reset selection

€26.85* % €0.00* (0.00% saved)

Unit price: €26.85* % €0.00*

Unit price (net): €22.56 % €0.00

Contents: 66 meter (€0.41* / 1 meter)

Delivery time 2-5 days working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.

Product information "3M polyester masking tape 8902, blue, 19 mm x 66 m"

For demanding processing conditions 3M™ Polyester Adhesive Tape 8901 is a thin, pliable polyester adhesive tape that is ideal for masking tasks in high-temperature applications and adheres well to silicone-coated surfaces. The translucent blue backing film is tear-resistant. Coated with a silicone adhesive, the tape produces sharp coloured edges and is therefore very suitable for masking workpieces during powder coating, for example. It can be removed from most surfaces cleanly and in one go without fraying or tearing. This adhesive tape is also ideal for splicing silicone liners, paper and films that are exposed to high temperatures. Thanks to its good chemical resistance, this adhesive tape proves its worth in chemical processes and other demanding work procedures, such as anodising. The pressure-sensitive silicone adhesive is suitable for a wide temperature range between -50 °C and +204 °C. Recommended areas of application Masking of workpieces during powder coating Splicing of silicone liners, films and papers Bonding of composite materials Covering of metal surfaces in acid or etching baths As surface protection against scratches during handling and transport As an easily removable masking tape during powder coating, the 3M 8900 series polyester adhesive tape is a good choice.

Properties

Good abrasion resistance
Very tear resistant
High resistance to chemicals
Temperature resistant from -50 °C to +200 °C
Excellent ageing resistance

Advantages

Excellent heat, abrasion and chemical resistance
More heat-resistant than rubber and acrylate adhesives

Product benefits

Reduces defects due to softening, leakage or transfer of the adhesive
Adheres well to difficult-to-bond surfaces such as silicone liners and moulds coated with release agent
Removes cleanly from stainless steel, anodised aluminium and glass even after 5 hours at 170 °C

Field of application

Masking tape for powder coating
Splicing of siliconised fibre fleece
Bonding of composite materials
Flashbreaker when removing parts from the mould

Questions about the article?

As we make up our own adhesive tapes (cut to size), there may be a tolerance of 1-2 mm on the first roll.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 16668

Part number: 89021966

SAP number: 7000049601

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Downloads

Download data sheet as PDF

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

3M Scotch-Brite hand pad CF-HP 7447 , red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Red | Körnung: Very fine | Länge in m: 0,224 m

Non-woven fibre hand material for cleaning, deburring, finishing and sanding surfaces in the metal, wood, plastic and other industrial and commercial sectors.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

Recently viewed products

3M 1310 ear muffs, particularly comfortable thanks to the elastic temple design, SNR = 26 dB

The 3M 1310 ear defenders are easy to use, practical and very comfortable to wear. It can be put on and taken off quickly and worn around the neck when not in use. This makes it ideal for temporary use. The special feature of these ear defenders is their elasticated headband design. This makes it particularly flexible and comfortable to wear. It is particularly light and hardly creates any pressure. The earplugs do not penetrate deep into the ear canal and therefore do not irritate the ear canal. Replacement earplugs are available (product number: 1311). Attenuation value: SNR=26 dB. Colour: black.

€6.34*

Tyrolit Non-woven pins DxD 50x50 For steel, stainless steel and non-ferrous metals, A MEDIUM, shape: 52LA, Art. 908854

TYROLIT fleece pins are highly adaptable and ensure that there is no change to the surface finish. The TYROLIT Premium range is now being extended by 29 types to provide you with a choice of different grit sizes and other dimensions. The large number of grit gradations means that different surface structures and roughnesses can be achieved. TYROLIT fleece points are also available with an inserted abrasive cloth to achieve higher material removal and a coarser surface finish.

€7.18*

3M Cubitron II Sanding belt 947A, 75 mm x 2500 mm, 120+

The new Cubitron II 947A sanding belts are characterised by the usual durability and speed of Cubitron II products. They produce a uniform sanding pattern without tarnishing colours. Thanks to the new grit mixture on an X-fabric backing, 947A belts are more flexible than previous Cubitron II belts. They are particularly suitable for hand-held machines at medium to low pressure. With the new 120+ grit, for the first time we are offering you the option of using Cubitron II for finer applications with higher finishing requirements.

Contents: 2.5 meter (€7.86* / 1 meter)

Variants from €0.73*

€19.64*

3M ATG Adhesive Film 969, Transparent, 6 mm x 33 m, 0.13 mm

The adhesive film without carrier 3M 969 with transparent adhesive film and very high instant adhesion is particularly suitable for slightly rough or textured surfaces. The 0.13 mm thick adhesive tape is temperature-resistant up to +80 °C (+120 °C for short periods) and is characterised by its good adhesion to low-energy materials (e.g. PE, PP).

Contents: 33 meter (€0.38* / 1 meter)

€12.65*

3M DBI-SALA Modular lifting technology HC - Floor sleeve, galvanized steel

3M DBI-SALA Modular lifting technology HC - Floor sleeve

€539.19*

3M Hookit Flexible fine grinding discs, 150 mm, P1200

The new 3M flexible fine sanding discs are the ideal companion when it comes to applications such as fine sanding of fillers, lacquering and matting. They not only impress with their enormous sanding performance, but also with a significantly longer service life compared to standard competitor products on the market. The flexible design ensures a high level of process reliability and at the same time enables very versatile use, whether by machine, by hand or wet or dry

Variants from €1.67*

€3.44*