3M polyurethane film adhesive tape 8592, transparent, 125 mm x 33 m, 0.20 mm

The XT Pro Extra Cut from Scotch-Brite Clean and Strip is an aluminium oxide abrasive grain integrated into an open nylon fibre. It removes heavy rust, thick paint and corrosion, saving you time. The highly adaptable, high-strength fibres are resistant to stress and are also convincing on edges.

The ceramic polishing pads with hook and loop fasteners are ideal for polishing stone surfaces. The grit sizes available in the range, from 50 to 3000, ensure a perfect surface finish on the material. With the PREMIUM POLISTAR pads, you can achieve the best results on granite, marble and terrazzo.

tesa 88021 is a grey, closed-cell PE foam equipped with an acrylic adhesive and a blue film liner. It has been specially developed to add a compressible layer to the bonding of printing plate and carrier film when printing directly onto corrugated board (flexo post-print). The excellent foam quality ensures outstanding print quality, especially in combination with thinner printing plates. It also offers long-term durability and excellent resistance to water and solvents. To use our tesaprint cushion foams, simply cut the desired foam size and remove the film insert to adhere the foam to the back of your carrier film after you have completed the printing plate mounting.

This metal-bonded CBN disc grinds all cutting tools for the wood and metal industry. Grinding disc sets for complete machining are available in the CBN grit size range B126 - B76. Important: It should only be used for deep grinding. A perfect balance of grit size, concentration and bond delivers extremely long tool life and profile accuracy.

3M Scotch-Weld 3762 is an EVA-based hotmelt adhesive. The product with 100 % solids content is particularly suitable for fast and secure carton sealing. The hot melt adhesive also impresses with its good shear strength and short setting time. Scotch-Weld 3762 is used, for example, for bonding cardboard, paper, fabric and textiles.

The 3M Aura 9332+ SV folding respirator allows you to breathe almost effortlessly and is extremely comfortable to wear. It owes its comfort plus in particular to the three-part design with the newly developed filter fleece. The advantages of the particle mask start with a good view: the sealing points on the top of the mask reduce the fogging of glasses - especially in combination with its 3M Cool Flow exhalation valve. This  valve increases wearing comfort, especially in hot and humid environments, as it allows respiratory heat and moisture to escape easily. The new filter technology also ensures comfortable breathing. It combines the advantages of 3M Electret filter technology with those of the new advanced technology for barely perceptible breathing resistance with reliable filter performance. The average inhalation resistance of 63% is significantly lower than the maximum permissible value of EN 149:2001+A1:2009. Two further advantages of the mask lie in its three-part design: on the one hand, it leads to greater comfort and problem-free speaking, and on the other hand, the mask can be folded flat and is therefore practical to take with you. The special design of the nose area is also ideal, as it adapts perfectly to the shape of the wearer's face. The chin strap makes it easy to position the mask, ensuring a good fit and a secure seal. The 3M Aura respirator 9332+SV is hygienically individually packaged and has protection level FFP3 NR D. The application limit is 30 times the limit value for particles. It is used in the construction industry, in agriculture, in quarries, in the clay and ceramics industry, in iron and steel foundries, in the chemical industry, in metalworking and processing, in the pharmaceutical industry and in construction. This model is available in small packs of 5 pieces. Approval according to standard EN 149:2001+A1:2009.