S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

€17.43* % €0.00* (0.00% saved)
Unit price: €17.43* % €0.00*
Unit price (net): €14.65 % €0.00
Contents: 0.5 liter (€34.86* / 1 liter)

Ready for immediate dispatch, delivery time approx. 1 - 3 working days


So that we can send you an offer with all costs incurred, please place the item in the shopping basket and request the offer here.
Product information "S-K-S 560 Lime-based industrial cleaner, clear, 500 ml"

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Properties
  • Effective lime-based cleaner
  • High cleaning performance
  • Non-corrosive
  • Gently cleans even stubborn dirt (even from most plastics)
Advantages
  • Effective lime-based cleaner
  • High cleaning performance
Product benefits
  • You will not achieve a (very) good bonding result without cleaned material surfaces
Field of application
  • Removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, tar residues, rubber abrasion, etc.
Signal word
Danger
Hazard pictogram(s)

Flamme

Ausrufezeichen

Gesundheitsgefahr

Umwelt

Hazard statement / CLP

H222 Extremely flammable aerosol. 
H229 Pressurised container: May burst if heated.
H304 May be fatal if swallowed and enters airways. 
H319 Causes serious eye irritation. 
H317 May cause an allergic skin reaction. 
H336 May cause drowsiness or dizziness. 
H411 Toxic to aquatic life with long lasting effects.

Prevention

P101 If medical advice is needed, have product container or label at hand. P102 Keep out of the reach of children. 
P103 Read the label before use. 
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. 
P211 Do not spray on an open flame or other ignition source. 
P251 Do not pierce or burn, even after use. P261 Avoid breathing aerosol. 
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. 
P405 Keep locked up. 
P501 Dispose of contents/container to hazardous or special waste collection point.

Reaction

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.

Waste disposal
Nicht in die Kanalisation oder Gewässer gelangen lassen. Entsorgung gemäß den behördlichen Vorschriften.

3 from 3 Reviews

5 from 5 Stars


100%

0%

0%

0%

0%


Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Montag, 27. November 2023

Claus-Dieter M.

Zu empfehlen

Macht was er verspricht

Dienstag, 4. Juli 2023

Peter Paul W.

Immer ein guter Sevice.

Ein hervorragendes Produkt. Super geeignet für Möbelstoffe.

Montag, 11. April 2022

Mario Schmidt

Alles besterns !!

Ware TOP Immer wieder !!

Article no: 61742
SAP number: 61742
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
Enquiry form

Customers also bought

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter
The  surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to  . The product is intended for industrial / professional use only.

Variants from €19.99*
€16.99*
3M Universal Primer 0,237l with UV indicator
The 3M adhesion promoter with UV indicator increases the adhesive strength of 3M VHB adhesive tapes on critical surfaces such as PE, PP, ABS, EPDM, PET/PBT mixtures. At the same time, a UV indicator enables the correct application to be checked. This improves process reliability, facilitates quality control and ensures a contemporary environmental profile.

Contents: 0.237 liter (€196.67* / 1 liter)

€46.61*
3M Scotch-Weld spray adhesive based on synthetic elastomers 77, beige, 500 ml
3M Scotch-Weld SW77 Spray Adhesive is a sprayable aerosol adhesive based on synthetic elastomers for permanent bonds. Its short flash-off time and bonding span allow fast work when bonding many materials. The product does not penetrate or sag on porous materials. Scotch-Weld 77 is suitable for bonding insulating materials such as polystyrene, rock and glass wool, felt, fabric, wood, paper and cardboard as well as various plastics, foams and rubber to each other and to metals.

Contents: 0.5 liter (€36.56* / 1 liter)

€18.28*
3M Scotch-Weld Cyanoacrylate adhesive SF 20, clear, 20 g
3M Scotch-Weld SF 20 is a low viscosity and very fast curing cyanoacrylate adhesive for high strength bonding of plastics, elastomers, paper, leather, metals and other common materials. The product is also suitable for acidic and porous surfaces. The best results are achieved with adhesive joints with small gaps and on relatively smooth, even surfaces. Scotch-Weld SF 20 is suitable, for example, for bonding silicone rubber to a plastic housing. After joining, the cyanoacrylate adhesive can seep capillary into the bonded joint.

Contents: 0.02 kilogram (€843.00* / 1 kilogram)

€16.86*
3M 389 Fabric tape, 50 mm x 50 m, white
The 3M fabric adhesive tape 389 is a universally applicable adhesive tape with very good adhesion properties on a wide variety of materials. It is characterised by good tear resistance and flexibility for use on uneven surfaces. The polyethylene-coated fabric adhesive tape is easy to handle and can also be used in conjunction with moisture. Easy masking in curves is possible with the close-meshed adhesive tape. It generally has a very high permanent holding power and good conformability. Possible applications include colour coding of components, general repair purposes or bundling pipes, fabrics and much more. Colour of the adhesive tape: silver.

Contents: 50 meter (€0.60* / 1 meter)

Variants from €11.38*
€29.94*
3M high-performance sealing tape 4411N, 75 mm x 16.5 m, 1 mm, translucent
The 4411 is a single-sided adhesive tape that has been specially developed for demanding sealing applications. The backing consists of an abrasion-resistant ionomer film, which is characterised by extreme flexibility despite its high robustness. Thanks to the flowing adhesive, the 4411 has excellent sealing properties and reliably compensates for unevenness on surfaces. The adhesive adheres well to the ionomer film so that the adhesive tape can also be used overlapping.

Contents: 16.5 meter (€6.00* / 1 meter)

Variants from €0.00*
€98.92*