Tesafix 51571 Non-woven PV9 19mmx2000m transparent

Double-sided adhesive tape made from closed-cell polyethylene foam. The acrylic adhesive has good initial tack and good adhesion to a variety of different surfaces.

The 3M protection and care cream is a mild yet effective skin protector for anyone who comes into contact with both water-soluble and oily substances. Aloe vera and vitamin B5 nourish and regenerate stressed skin and at the same time make it easier to remove heavy soiling when the cream is applied to clean hands before work. Together with the 3M dispenser for skin protection products, the 1.4 litre refill bags also represent an economical solution for skin care in everyday working life.

3M 255P is a universal sanding tool that is very well suited for all wood sanding applications by hand or with an orbital sander thanks to its flexible C-paper backing. Its special coating also makes it ideal for sanding lacquer in fine grits without the sandpaper clogging too early. It can be used both by hand and on machines.

The PREMIUM FASTCUT stands for excellent, specific material removal. This allows you to reach your goal faster, while the disc remains sharp and aggressive throughout its entire service life! The TYROLIT FASTCUT flap disc is the perfect tool for demanding grinding work such as edge grinding and weld seam processing. It can be used on high-alloy steels and stainless steel as well as on unalloyed and low-alloy steels. The additional TOP SIZE coating offers cool grinding. It can also be used on aluminium to a limited extent.

The 3M Adflo blower unit is respiratory protective equipment which, in combination with an approved headpiece, provides the user with a high level of protection and comfort during welding and related activities. The blower unit has a particle filter, a spark arrester, a pre-filter and a 5-stage filter saturation indicator that shows the user the status of the particle filter. Optional gas filters offer additional protection against common gases and vapours that can occur during welding. Furthermore, an optional odour protection filter can be used to protect the user from unpleasant odours. The blower unit has an automatic air flow control which ensures that the air flow to the head section is always constant. Integrated electronics permanently monitor the battery power and the air flow and immediately trigger a visual and audible alarm if the level falls below set limits. There is a choice of two Li-ion batteries, a standard and a high-performance battery. The unit also has an altitude calibration function that automatically adjusts the function of the device to the respective altitude above sea level. The Adflo blower respiratory protection system draws in the polluted ambient air, passes it through the respective filters and then directs the purified air into the head section via an air hose. For details on the protection levels and possible restrictions on use, please refer to the operating instructions for the head pieces used. Set: 3M Adflo starter pack - 1x Adflo blower respirator 837730 - 1x Air hose QRS 834016 - 1x Adapter QRS 533506 - 1x Air flow meter 838020 - 1x Pre-filter 836010 - 1x spark arrester 836000 - 1x Particle filter 837010 - 1x Li-lon standard battery approx. 8 hours 837630 - 1x Belt 835000 - 1x Charger 833111   - 1x 3M Versaflo disposable lightweight bonnet S533L with integrated head holder, white, robust, crackle-free and low-lint material, additional protection for neck and shoulder area, size M/L Material: Ventflex

Das Sägeblatt hat die Maße 100 × 7,5 × 1,2 und ist besonders verschleißfest.   Jigsaw ist das perfekte Stichsägeblatt für alltägliche Arbeiten in Holz, bei denen es nicht auf Präzision ankommt. Ein wirklich gutes Standard-Sägeblatt, das man immer in seiner Werkzeugsammlung haben sollte. Der Blattschaft mit T-Schaft ist sehr gebräuchlich und daher kompatibel mit den gängigsten Stichsägen auf dem Markt.   Die Breite von 7,5 mm bietet nicht nur eine gute Unterstützung für gerade Schnitte, sondern auch die Möglichkeit, weiche Rundungen zu sägen. Die Zähne werden aus dem Stahl gefräst. Anschließend werden sie seitlich etwas verdreht, sodass die Sägenut etwas breiter ist als das Sägeblatt. Dadurch wird das Stichsägeblatt robuster und schneidet es schneller.   Die Länge dieses Stichsägeblattes beträgt 100 mm, muss aber immer an das Material angepasst werden. Das Sägeblatt sollte lang genug sein, um ganz durchzukommen, aber nicht so lang, dass sie anfängt zu vibrieren.