Tesafix 62510 25mx50m black, blue PE liner

tesa 62510 is a double-sided adhesive tape with a PE foam carrier for mounting applications. The tape consists of a flexible PE foam backing and a modified acrylic adhesive.

For the highest demands on surface quality, combined with high cutting performance and an exceptional finish.

The Powerbond Ultra Strong mounting tape is the strongest mounting tape from tesa and is suitable for securely fastening objects indoors and outdoors. tesa Powerbond Ultra Strong is the strongest mounting tape from tesa®. It is suitable for attaching objects indoors and outdoors. The impressive adhesive performance of up to 10 kg per 10 cm means that you can do without drills, plugs and screws even when fixing heavier objects. The mounting tape is easy to handle and provides a permanent and reliable hold. The extra strong mounting tape - securely fasten heavy objects without drilling For a long time, it was an unwritten law that heavy objects could only be securely fastened using screws or nails. With the introduction of tesa Powerbond® Ultra Strong at the latest, the law was broken. The strongest mounting tape from tesa positions itself as a real competitor to the drill with its high holding power. Thanks to the superior tesa® adhesive technology and an adhesive performance of up to 10 kg per 10 cm of tape, it is able to provide a permanently secure hold even for objects with a higher weight. With tesa Powerbond® Ultra Strong you can work quickly, cleanly and avoid damage such as drill holes in the substrate. Better bonding than drilling! GOOD TO KNOW ... OUR APPLICATION TIPS:   - APPLYING: In order for the mounting tape to develop its full holding power, the object and substrate must be free of dust, dirt and grease. A brush, a lint-free cloth and a silicone-free cleaner (or white spirit) are suitable for cleaning. - Check whether the surface or the object is rough. Apply the mounting tape to the rougher surface first. - Apply the tape in vertical strips over the full length of the object or surface. Reinforce the upper area with shorter strips, as this is where the greatest load is applied. Press the mounting tape down firmly for at least five seconds. - Remove the protective film from the double-sided adhesive tape and take care not to touch the open adhesive surface. This could impair the adhesive strength. - Fix the object and press firmly again for at least five seconds. -REMOVE: As the mounting tapes are intended for permanent use, material residue may remain on the object. Try to remove the residue with tesa® adhesive remover. To ensure that the substrate remains as undamaged as possible, carefully pull the mounting tape parallel to the wall

tesakrepp 4348 painter's masking tape consists of a lightly creped paper backing specially developed for painting applications and a natural rubber adhesive.

Can be used for multi-hole, 7-, 9- and 15-hole sanding discs on 3M electric random orbital sanders

Scotch-Brite SC-BL non-woven tapes are characterised by minimal elongation and are ideal for finishing and deburring work. Various backings, different degrees of fineness and many different dimensions enable use on almost any machine for a wide range of applications.

Scotch masking tape is a gold-coloured special masking tape with a thin paper backing and synthetic adhesive. It is suitable for holding, bundling, sealing and masking, especially when sunlight is likely to be present. The 300 is therefore ideal for professional masking work both indoors and outdoors. Gold-coloured, smooth and extra-thin paper tape with special impregnation and a particularly high-quality acrylic adhesive with medium adhesive strength.