Tyrolit C-P68 P C | C-P68 P A Paper sheets TxH 230x280 For steel, non-ferrous metals, wood, paints and varnishes, P120, shape: SHEET, Art. 724267

SKS Aufbewahrungsbox für Gehörschutz 3M Peltor SportTac / 3M Bulls Eye I mit faltbarer mit Kopfbügel faltbar  *ohnen Inhalt

3M 266X is self-adhesive (PSA) on a 3 mil film backing with aluminium oxide grain and is available in grain sizes 0.3 - 3 - 9 - 12 - 30 - 40 microns. It is a 3M Lapping Film type P, i.e. it has a harder bonding system and is used for hard materials.

Scotch-Weld EC 9323-2 B/A has been developed for bonding metals such as aluminium, steel, a variety of plastics and composite materials such as SMC, GRP, CFRP and epoxy resin laminates. The product is characterised by good flexibility, high shear, peel and impact strength and good resistance to oils, fuels and moist heat.

The 3M Adflo blower unit is respiratory protective equipment which, in combination with an approved headpiece, provides the user with a high level of protection and comfort during welding and related activities. The blower unit has a particle filter, a spark arrester, a pre-filter and a 5-stage filter saturation indicator that shows the user the status of the particle filter. Optional gas filters offer additional protection against common gases and vapours that can occur during welding. Furthermore, an optional odour protection filter can be used to protect the user from unpleasant odours. The blower unit has an automatic air flow control which ensures that the air flow to the head section is always constant. Integrated electronics permanently monitor the battery power and the air flow and immediately trigger a visual and audible alarm if the level falls below set limits. There is a choice of two Li-ion batteries, a standard and a high-performance battery. The unit also has an altitude calibration function that automatically adjusts the function of the device to the respective altitude above sea level. The Adflo blower respiratory protection system draws in the polluted ambient air, passes it through the respective filters and then directs the purified air into the head section via an air hose. For details on the protection levels and possible restrictions on use, please refer to the operating instructions for the head pieces used. Set: 3M Adflo starter pack - 1x Adflo blower respirator 837730 - 1x Air hose QRS 834016 - 1x Adapter QRS 533506 - 1x Air flow meter 838020 - 1x Pre-filter 836010 - 1x spark arrester 836000 - 1x Particle filter 837010 - 1x Li-lon standard battery approx. 8 hours 837630 - 1x Belt 835000 - 1x Charger 833111   - 1x 3M Versaflo safety helmet M307 with flame-retardant face seal and polycarbonate visor, clear

Neck protection made of fabric, special accessory for 3M Speedglas high-performance welding mask G5-01. For use as neck protection if fabric is preferred or if the rigid standard protection constantly rests on the chest when welding in a downward-facing position.

The Scotch-Brite compact disc CP-WL with medium hardness (7) is ideal for finishing work, especially for achieving decorative, fine surfaces, particularly on stainless steel. It produces a dense, fine finish with a very low roughness depth and can also be profiled. Please note the running direction.