TYROLIT grinding wheels DxDxH 60x10x10 1F80 for steel, shape: 1F80 - straight version (rough grinding wheel), Art. 441219

High-quality foamed and soft plate mounting tape for precise printing with low dot gain for predominantly halftone and half-tone motifs. All plate mounting tapes from 3M have been specially developed for the highest demands and are suitable for the finest screen rulings and new repro techniques such as NX, HD and MC and are already being used successfully worldwide.

The three-dimensional fibre fleece of the Scotch-Brite flap brush PF-ZS produces a dense, matt finish without damaging the workpiece. Thanks to the soft, flexible flap construction, an even surface is produced without chatter marks. The 6 mm shaft is used for direct mounting on flexible shafts, straight grinders and drills. No additional accessories are required.

3M cold shrink sleeves are used to insulate all plastic or rubber insulated cables. The products are supplied pre-stretched on a removable support spiral, enabling efficient and simple installation. After installation, the cold-shrink tubing provides reliable protection against moisture thanks to its constant radial contact pressure. Its good thermal stability and resistance to acids, alkalis, ozone and UV radiation guarantee long-lasting functionality. The 3M EPDM cold-shrink tubing is stretched at the factory and mounted on a removable plastic support spiral. Simply prepare the connection, attach the tubing and unwind the support spiral.

This high-performance product with hard-wearing polycotton fabric has been developed for demanding applications on steel and non-ferrous metals. In combination with hard zirconium, these belts are ideal for very high pressure and deliver above-average stock removal. Active coolants reduce heat generation during grinding. Another special feature: The product can also be used wet with oil, emulsion or water and still offers the best results.

The Powerbond Ultra Strong mounting tape is the strongest mounting tape from tesa and is suitable for securely fastening objects indoors and outdoors. tesa Powerbond Ultra Strong is the strongest mounting tape from tesa®. It is suitable for attaching objects indoors and outdoors. The impressive adhesive performance of up to 10 kg per 10 cm means that you can do without drills, plugs and screws even when fixing heavier objects. The mounting tape is easy to handle and provides a permanent and reliable hold. The extra strong mounting tape - securely fasten heavy objects without drilling For a long time, it was an unwritten law that heavy objects could only be securely fastened using screws or nails. With the introduction of tesa Powerbond® Ultra Strong at the latest, the law was broken. The strongest mounting tape from tesa positions itself as a real competitor to the drill with its high holding power. Thanks to the superior tesa® adhesive technology and an adhesive performance of up to 10 kg per 10 cm of tape, it is able to provide a permanently secure hold even for objects with a higher weight. With tesa Powerbond® Ultra Strong you can work quickly, cleanly and avoid damage such as drill holes in the substrate. Better bonding than drilling! GOOD TO KNOW ... OUR APPLICATION TIPS:   - APPLYING: In order for the mounting tape to develop its full holding power, the object and substrate must be free of dust, dirt and grease. A brush, a lint-free cloth and a silicone-free cleaner (or white spirit) are suitable for cleaning. - Check whether the surface or the object is rough. Apply the mounting tape to the rougher surface first. - Apply the tape in vertical strips over the full length of the object or surface. Reinforce the upper area with shorter strips, as this is where the greatest load is applied. Press the mounting tape down firmly for at least five seconds. - Remove the protective film from the double-sided adhesive tape and take care not to touch the open adhesive surface. This could impair the adhesive strength. - Fix the object and press firmly again for at least five seconds. -REMOVE: As the mounting tapes are intended for permanent use, material residue may remain on the object. Try to remove the residue with tesa® adhesive remover. To ensure that the substrate remains as undamaged as possible, carefully pull the mounting tape parallel to the wall

Textile entrance flooring for high footfall of up to 5000 people/day. Due to the composition of coarse and fine fibres, high dirt and moisture absorption can be guaranteed and entry into the building prevented. The material dries out again quickly thanks to optimum moisture distribution. Material height 7.5 mm. Fire behaviour according to EN 13501-1: Cfl-s1. Slip resistance according to DIN 51130: R12.