TYROLIT laboratory cut-off wheels DxDxH 250x1.5x32 For steel and stainless steel, shape: 41N - straight version (non-woven cut-off wheel), Art. 165940

Multicutter-Sägeblatt, das besonders für Holz geeignet ist. Ultrascharf mit Doppelverzahnung, infektionsfreie Oberfläche und wiederverschließbare Verpackung – das ultimative Sägeblatt für Holz.   Die Sägeblätter sind kompatibel mit Fein Multimaster, Makita, Bosch, Milwaukee, AEG, Ridgid, Skil, Dremel, Einhell, Mastercraft, Craftsman und andere.   Die Sägeblätter des Multicutters lassen sich leicht auswechseln und erleichtern die Arbeit an verschiedenen Projekten und Materialien, ohne dass das Werkzeug gewechselt werden muss. Sie sind eine gute Investition für professionelle Handwerker und Heimwerker, die häufig an verschiedenen Projekten arbeiten und Materialien mit großer Präzision und Kontrolle schneiden möchten.

The 3M Adflo blower unit is respiratory protective equipment which, in combination with an approved headpiece, provides the user with a high level of protection and comfort during welding and related activities. The blower unit has a particle filter, a spark arrester, a pre-filter and a 5-stage filter saturation indicator that shows the user the status of the particle filter. Optional gas filters offer additional protection against common gases and vapours that can occur during welding. Furthermore, an optional odour protection filter can be used to protect the user from unpleasant odours. The blower unit has an automatic air flow control which ensures that the air flow to the head section is always constant. Integrated electronics permanently monitor the battery power and the air flow and immediately trigger a visual and audible alarm if the level falls below set limits. There is a choice of two Li-ion batteries, a standard and a high-performance battery. The unit also has an altitude calibration function that automatically adjusts the function of the device to the respective altitude above sea level. The Adflo blower respiratory protection system draws in the polluted ambient air, passes it through the respective filters and then directs the purified air into the head section via an air hose. For details on the protection levels and possible restrictions on use, please refer to the operating instructions for the head pieces used. Set: 3M Adflo starter pack - 1x Adflo blower respirator 837730 - 1x Air hose QRS 834016 - 1x Adapter QRS 533506 - 1x Air flow meter 838020 - 1x Pre-filter 836010 - 1x spark arrester 836000 - 1x Particle filter 837010 - 1x Li-lon standard battery approx. 8 hours 837630 - 1x Belt 835000 - 1x Charger 833111   - 1x 3M Versaflo disposable lightweight bonnet S133S, with integrated head holder, white, universal textile material, size S/M - Material: Web 24

The PREMIUM FASTCUT stands for excellent, specific material removal. This allows you to reach your goal faster, while the disc remains sharp and aggressive throughout its entire service life! The TYROLIT FASTCUT flap disc is the perfect tool for demanding grinding work such as edge grinding and weld seam processing. It can be used on high-alloy steels and stainless steel as well as on unalloyed and low-alloy steels. The additional TOP SIZE coating offers cool grinding. It can also be used on aluminium to a limited extent.

The carrier film of this adhesive tape gives foams and other materials increased dimensional stability and also makes the tape easier to handle when cutting and punching.  With a very high initial tack, the adhesive strength of the 3M 300LSE adhesive increases even further depending on time and temperature. 120 µm thick, transparent polyester backing with a 95 µm thick 300LSE series adhesive layer on each side. 110 µm thick, PE-coated, light brown protective paper.

The 3M Adflo blower unit is respiratory protective equipment which, in combination with an approved headpiece, provides the user with a high level of protection and comfort during welding and related activities. The blower unit has a particle filter, a spark arrester, a pre-filter and a 5-stage filter saturation indicator that shows the user the status of the particle filter. Optional gas filters offer additional protection against common gases and vapours that can occur during welding. Furthermore, an optional odour protection filter can be used to protect the user from unpleasant odours. The blower unit has an automatic air flow control which ensures that the air flow to the head section is always constant. Integrated electronics permanently monitor the battery power and the air flow and immediately trigger a visual and audible alarm if the level falls below set limits. There is a choice of two Li-ion batteries, a standard and a high-performance battery. The unit also has an altitude calibration function that automatically adjusts the function of the device to the respective altitude above sea level. The Adflo blower respiratory protection system draws in the polluted ambient air, passes it through the respective filters and then directs the purified air into the head section via an air hose. For details on the protection levels and possible restrictions on use, please refer to the operating instructions for the head pieces used. Set: 3M Adflo starter pack - 1x Adflo blower respirator 837730 - 1x Air hose QRS 834016 - 1x Adapter QRS 533506 - 1x Air flow meter 838020 - 1x Pre-filter 836010 - 1x spark arrester 836000 - 1x Particle filter 837010 - 1x Li-lon standard battery approx. 8 hours 837630 - 1x Belt 835000 - 1x Charger 833111   - 1x 3M Versaflo premium lightweight bonnet S657 starter pack incl. head holder and inner bib, material: Web 24

The 3M adhesion promoter with UV indicator increases the adhesive strength of 3M VHB adhesive tapes on critical surfaces such as PE, PP, ABS, EPDM, PET/PBT mixtures. At the same time, a UV indicator enables the correct application to be checked. This improves process reliability, facilitates quality control and ensures a contemporary environmental profile.