Tyrolit Pendulum surface grinding ceramic conventional DxDxH 300x40x127 For carbide and cast iron, shape: 1, Art. 664530

This tool is designed to be used on both steel and stainless steel and offers an economical solution to your cost problems in the standard widths. The STANDARD 2in1 ensures a very good tool life and stability. This tool is suitable for cutting sheet metal, profiles, pipes, rods and solid material. The range of STANDARD cutting discs extends from 1.0 to 2.0 mm and guarantees fast and convenient work with maximum tool life.

Innovative abrasive cloth with pyramid-shaped grain structure. Saves several work steps. Very fine sanding pattern with high material removal. Removes scratches and weld spots. Ideal starting point for subsequent mirror polishing. Leaves fine roughness depths.

Use this diamond disc to grind all carbide cutting tools for the wood and metal industry as well as various shear blades. Grinding disc sets for complete machining in diamond grit size range D64 - D46. Important: It should only be used for deep grinding. A perfect balance of grit size, concentration and bond delivers extremely long service life and profile accuracy.

The precision-moulded abrasive grain cuts evenly through the metal, has a permanently sharp effect and achieves a clean, low-burr and even surface. The uniform structure of the 3M 984F impresses with the fastest sanding (up to 40% faster sanding processes) and maximum stock removal, especially when chamfering and stock removal sanding. The Cubitron II abrasive belt achieves 2 to 4 times the service life of other products. The even processing of the workpiece in combination with the integrated sanding aid ensures cool sanding and prevents stress cracks and discolouration.

These electroplated diamond files are mainly used for machining hardened steels and carbide. However, they are also suitable for glass, ceramics and materials over 40 HRC. This product is only available in diamond grit version with grit size D35. It is part of the standard equipment of every toolmaker. Finer grit sizes are available on request.

The 3M Peltor safety helmet G3000 with 3M Uvicator sensor was developed in close cooperation with industry and forestry and fulfils the highest protection requirements. The G30CUO model made of UV-stabilised ABS plastic is orange and equipped with a headband with pinnlock fastening system and PVC sweatband. Unlike conventional helmets with ventilation, the G3000 has significantly more ventilation slots. This maximum permissible ventilation area on the top of the helmet shell ensures an exceptionally high level of comfort even during physically strenuous work in warm environments. The extra short peak ensures optimum visibility. The slim, round shape reduces the risk of getting caught on branches, for example. The Peltor G3000 safety helmet also offers a decisive advantage when working in confined spaces or climbing in trees: the interior can be rotated through 180° so that the safety helmet can also be worn with the peak on the back of the neck. Thanks to the special profile design, it is also easy to attach ear muffs or visors. Particularly practical: the patented 3M Peltor Uvicator sensor indicates when the helmet has lost its protective effect due to excessive UV radiation and should be replaced. The three-point fastening option of a chin strap (optionally available as an accessory) ensures individual adjustment to the shape of the head and a perfect fit. The 3M Peltor safety helmet G3000 with 3M Uvicator can be used in forestry, industry and construction. The helmet is suitable for head widths from 54 - 62 cm.