Product information "Tyrolit ZA-P41 PC X belts TxH 50x1000 For steel and non-ferrous metals, P80, mould: BELT, Art. 706422"
This high-performance product with hard-wearing polycotton fabric has been developed for demanding applications on steel and non-ferrous metals. In combination with hard zirconium, these belts are ideal for very high pressure and deliver above-average stock removal. Active coolants reduce heat generation during grinding. Another special feature: The product can also be used wet with oil, emulsion or water and still offers the best results.
Share your experience with the product with other customers.
Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.
Log in
No reviews found. Go ahead and share your findings with others.
Article no:
37913
SAP number:
706422
Do you need die-cut parts?
We will be happy to provide you with a non-binding offer.
This high-performance product with hard-wearing polycotton fabric has been developed for demanding applications on steel and non-ferrous metals. In combination with hard zirconium, these belts are ideal for very high pressure and deliver above-average stock removal. Active coolants reduce heat generation during grinding. Another special feature: The product can also be used wet with oil, emulsion or water and still offers the best results.
3M polyimide film 92 is characterised above all by its extreme temperature resistance and very good dielectric properties. In conjunction with a high-quality silicone adhesive, it forms a high-performance combination of mechanical, electrical, thermal and chemical properties, which remain stable in a temperature range from -40 °C to +180 °C. This means that the insulating tape belongs to insulating material class H. The 0.076 millimetre thin adhesive tape can withstand a breakdown voltage of 7,500 volts and is flame-retardant in accordance with UL 510. The polyimide film is therefore suitable for applications where it is exposed to high temperature fluctuations, particularly for masking contacts when soldering circuit boards. As it is printable, it can also be used for cable bundling and labelling, among other things.
With the 3M Soft Hand Roll 216U, you can achieve an even sanding pattern even on edges and curves. The flexible hand sandpaper with a four millimetre thick foam backing is easy to bend, but does not produce any sharp edges. It also adapts perfectly to moulded surfaces, making it easy to sand hard-to-reach areas as a complement to dry sanding. The 25 metre long roll is perforated every 145 millimetres. This allows you to easily remove exactly as much sandpaper as you need.
3M Paint Protection Films offer numerous benefits to automotive manufacturers, from extensive 3M research and development resources, global design support, application engineering and world-class manufacturing technology. 3M Paint Protection Films meet and exceed OEM requirements for appearance, performance and weathering. Our films are available in a variety of thicknesses and adhere to a wide range of substrates and surfaces. The 3M high performance protection films have been specially developed for the protection of painted automotive surfaces to protect the paint against mechanical influences and to maintain the appearance in the long term. The 3M high-performance protective films are particularly suitable for protection against chemical and mechanical influences (e.g. stone chipping) and long-term protection against environmental influences. The broad product portfolio enables customer-optimised applications, films adapt to complex contours and, thanks to their good adhesive properties, films can also be applied around corners and edges PU film (200 µm, unpainted), solvent-based adhesive. Maximum protection for the paintwork against stone chips and scratches. Suitable for applications on curved surfaces.
Our 3M Heavy Duty Double Sided Adhesive Tape 9528 is a 0.8 mm thick, double-sided adhesive tape made of closed cell polyethylene foam (95 kg/m³ density) with a rubber-resin adhesive. It offers strong adhesion for lighter applications.
Materials that can be machined: Universal building materials such as concrete, brick, natural stone, etc. Details: Reduction ring 20?16 mm is supplied with diameter 105 mm.
The Powerbond Ultra Strong mounting tape is the strongest mounting tape from tesa and is suitable for securely fastening objects indoors and outdoors. tesa Powerbond Ultra Strong is the strongest mounting tape from tesa®. It is suitable for attaching objects indoors and outdoors. The impressive adhesive performance of up to 10 kg per 10 cm means that you can do without drills, plugs and screws even when fixing heavier objects. The mounting tape is easy to handle and provides a permanent and reliable hold.
The extra strong mounting tape - securely fasten heavy objects without drilling For a long time, it was an unwritten law that heavy objects could only be securely fastened using screws or nails. With the introduction of tesa Powerbond® Ultra Strong at the latest, the law was broken. The strongest mounting tape from tesa positions itself as a real competitor to the drill with its high holding power. Thanks to the superior tesa® adhesive technology and an adhesive performance of up to 10 kg per 10 cm of tape, it is able to provide a permanently secure hold even for objects with a higher weight. With tesa Powerbond® Ultra Strong you can work quickly, cleanly and avoid damage such as drill holes in the substrate. Better bonding than drilling! GOOD TO KNOW ... OUR APPLICATION TIPS:
- APPLYING: In order for the mounting tape to develop its full holding power, the object and substrate must be free of dust, dirt and grease. A brush, a lint-free cloth and a silicone-free cleaner (or white spirit) are suitable for cleaning. - Check whether the surface or the object is rough. Apply the mounting tape to the rougher surface first. - Apply the tape in vertical strips over the full length of the object or surface. Reinforce the upper area with shorter strips, as this is where the greatest load is applied. Press the mounting tape down firmly for at least five seconds. - Remove the protective film from the double-sided adhesive tape and take care not to touch the open adhesive surface. This could impair the adhesive strength. - Fix the object and press firmly again for at least five seconds. -REMOVE: As the mounting tapes are intended for permanent use, material residue may remain on the object. Try to remove the residue with tesa® adhesive remover. To ensure that the substrate remains as undamaged as possible, carefully pull the mounting tape parallel to the wall
Contents:
5 meter
(€2.64* / 1 meter)
€13.21*
Data protection notice
The video will be loaded after your confirmation via the video portal YouTube. By confirming, you agree to load the videos on this page from the external provider YouTube in compliance with the GDPR.