3M DBI-SALA Rollgliss - R350 pulley system, incl. pulleys and carabiners, reduction ratio 5:1

In foundries and mould making, ceramic mounted points are often the only way to achieve improved surface results in hard-to-reach areas. PREMIUM mounted points from TYROLIT offer the longest possible service life, even for hardened steels. These tools also offer an optimum balance between clamping power and the surface finish to be achieved. Maximum working speed: 50 m/s

Newly developed for your requirements. Introducing the next step in surface finishing technologies: Scotch-Brite precision non-woven discs. This new addition to the Scotch-Brite range promises the consistency you have come to expect, with faster stock removal and longer abrasive life. By combining two outstanding 3M technologies - fleece and the 3M precision-moulded ceramic grain - you can now achieve an ideal finish even faster. To help you work even more efficiently, these discs are available in brighter, more vibrant colours to make them easier to distinguish. In addition, the range of grits has been extended to include fine and extra coarse versions, giving you an even wider choice of solutions for your abrasive needs.   Improve your work processes. These high quality general purpose abrasive discs are designed to optimise the steps involved in surface finishing, including cleaning, blending, deburring and finishing. Typical substrates include aluminium and soft metals, carbon steel and stainless steel. Applications range from the removal of coatings and corrosion to the finishing and post-processing of castings.

This premium product, equipped with polyester fabric, was developed for use on steel and non-ferrous metals. In combination with hard zirconium, these belts are ideal for light to medium pressure and deliver good stock removal. Active coolants reduce heat build-up during grinding.

The 3M Peltor G3000 head protection combination is optimised for the special requirements of forestry and offers effective protection for the head, face and hearing. The 3MO315C combination is orange and includes the 3M Peltor H31P3E ear muffs with an attenuation value of SNR=28dB(A) and the 5C mesh visor made of stainless steel (wire mesh) in addition to the G3000 safety helmet. The safety helmet made of UV-stabilised ABS plastic has a headband with a ratchet fastener for quick and precise size adjustment and a soft sweat leather. Unlike conventional helmets with ventilation, the G3000 has significantly more ventilation slots. This maximum permissible ventilation area on the top of the helmet shell ensures an exceptionally high level of comfort even during physically strenuous work in warm environments. The extra short peak ensures optimum visibility. The slim, round shape also reduces the risk of getting caught on branches, for example. The Peltor G3000 safety helmet also offers an advantage when working in confined spaces or climbing in trees: the interior can be rotated through 180° so that the safety helmet can also be worn with the peak on the back of the neck. Particularly practical: The patented 3M Peltor Uvicator sensor indicates when the helmet has lost its protective effect due to excessive UV radiation and should be replaced. The high-quality sweat leather is easy to replace if necessary and ensures maximum hygiene. The 3M Peltor G3000 head protection combination is used in forestry, agriculture and horticulture. The combination is FPA tested. The helmet is suitable for head widths from 53 - 62 cm.

3M Cubitron II Netzscheiben ist eine Reihe von schnell schneidenden und langlebigen Netzscheiben, die die außergewöhnliche Schnittleistung und längere Lebensdauer eines Cubitron II Schleifmittels bieten. Sie sind so konzipiert, dass Staubabsauger ihr Bestes geben und praktisch keinen Staub auf der Arbeitsfläche oder in der Umgebung hinterlassen. Kombinieren Sie sie mit einem von 3M empfohlenen Schleif- und Staubabsaugsystem, um das ideale Staubabscheidungssystem für Ihre Werkstatt zu schaffen.   Verbringen Sie weniger Zeit mit dem Schleifen mit 3M Cubitron II Net Discs. Unsere schnell schneidenden, langlebigen Netzscheiben verfügen über einen Netzträger und scharfe 3M Cubitron II Schleifkörner, die zusammen den bestmöglichen Schnitt liefern, ohne die Staubabscheidung zu beeinträchtigen. Sie sind für den Einsatz mit Standard-Staubabsaugsystemen ausgelegt, einschließlich tragbarer Staubabsauger, Zentralstaubsauger und Schleifmaschinen mit angeschlossenem Beutel. Sie sind in Qualitäten von 80+ bis 320+ erhältlich, um Reparaturarbeiten von der Demontage bis zur Lackierung schneller zu erledigen. Ihre lange Lebensdauer bedeutet, dass Sie weniger Schleifmittelwechsel vornehmen müssen, während ihre schnellere Schnittrate bedeutet, dass Sie weniger Zeit mit dem Schleifen verbringen. Mit den 3M Cubitron II Net Discs müssen Sie keine Leistung für die Staubabsaugung opfern. Sie müssen sich nicht mit Schleifmitteln begnügen, die sich nicht durchsetzen, wie z. B. solche, die langsam anlaufen, aber nicht lange halten, oder solche, die pro Blatt billiger sind, aber trotzdem Ihren Gewinn erhöhen. Kombinieren Sie mit einem von 3M empfohlenen Schleif- und Staubabsaugsystem, um die ideale Staubabsauglösung für Ihre Werkstatt zu schaffen.

The double ball bearings of the 3M straight grinders create the conditions for absorbing vertical and horizontal forces, which leads to an extended machine service life. These machines achieve better performance and pulling power due to reduced speeds at high torques thanks to their offset gear units. Other special features: Rotatable air outlet (360°), grip and precise handling thanks to 3M Greptile material, 2-fold cone on the collet, model no. 28346 with spindle extension. Included in the scope of delivery: Straight grinder, accessories for tool change, oil, connection nipple for compressed air supply, operating instructions, 3M service pack